RLC1-011BAB Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
49 Seconds
The Bosch Rexroth Indramat RLC1-011BAB is a power cable from the RLC1 Motor Power Cables series featuring 4 power conductors of 0.75 mm² cross-section and 2 auxiliary conductors of 0.14 mm². This basic cable supports up to 10.4 A current rating and is designed for 5,000,000 bending cycles with a standard operating life of 30,000 hours. It is compatible with IndraDrive, IndraDrive C, and IndraDrive Mi controllers.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RLC1-011BAB cable is a power supply lead produced by Bosch Rexroth Indramat in the RLC1 Motor Power Cables series. It is specified as a motor power cable intended to link servomotors to compatible drive controllers inside an industrial cabinet or drag chain. By transmitting three-phase supply and auxiliary signals through matched conductors, the assembly provides the electrical path required for coordinated motion control while conforming to the wiring conventions used across Rexroth automation platforms.
Four copper power cores provide the phase and protective-earth circuit; the count is indicated by 4 dedicated conductors sized to 0.75 mm² each, which corresponds to an American gauge value of 18 AWG. Two additional signal lines, identified as 2 auxiliary conductors, support temperature sensors or brake release circuits. All six wires are arranged according to the mixed pattern 4x L + 2x 0.14 mm². The 0.14 mm² cross-section of every auxiliary core reduces bulk while still covering low-current needs. The cable is listed within the Rexroth Cables product group, carries a basic design rating, and is approved for continuous currents up to 10.4 A over its power pair bundle.
The mechanical specification defines the service envelope rather than the electrical one. The sheath and stranding geometry support a flex endurance of 5,000,000 cycles, giving it the resilience required for dynamic drag-chain routing across linear axes. When operated inside the stated limits the assembly achieves a normative life of 30,000 h before preventive replacement is suggested. Integration is direct with IndraDrive/ IndraDrive C/ IndraDrive Mi inverter families, and the mating motor side is keyed for ML3 Motors. These controller and motor pairings allow the cable to maintain its specified electrical loading while preserving EMC compliance in enclosed machine spaces.
Frequently Asked Questions about RLC1-011BAB:
Q: How many power conductors are included in the RLC1-011BAB cable?
A: The RLC1-011BAB power cable has four power conductors designed for reliable motor connections.
Q: What is the current rating for power circuits on the RLC1-011BAB cable?
A: This cable is rated for a power current of 10.4 A, enabling it to handle significant electrical loads.
Q: What wire gauge is used for the power conductors in the RLC1-011BAB cable?
A: The RLC1-011BAB uses 18 AWG wiring for its power conductors.
Q: Which controllers are compatible with the RLC1-011BAB cable?
A: This cable supports IndraDrive, IndraDrive C, and IndraDrive Mi controllers.
Q: What is the standard operating life of the RLC1-011BAB power cable?
A: The standard operating life for the RLC1-011BAB cable is 30,000 hours.
