RLB2-113KEB Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RLB2-113KEB is part of the RLB Motor Power Cables series and has a basic cable design with a PUR orange jacket. This power cable has a conductor cross-section of 25 mm², supports up to 93.9 Amps at 40 °C, and operates with a rated voltage of 600/1000 V. It is compatible with ctrlX DRIVE controllers and MS2(X) motor series, and features a C (M50) terminal box motor connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RLB2-113KEB is a motor-side power lead produced by Bosch Rexroth Indramat within the RLB Motor Power Cables series. Supplied as a dedicated link from MS2(X) synchronous motors to the plant junction point, the cable routes three-phase stator power and protective earth back to ctrlX DRIVE in dynamic automation cells. Its design supports continuous motion schemes where routing chains demand endurance without signal loss or current derating.
The copper cores have a cross-section of 25 mm², allowing a steady load of 93.9 A at 40 °C when the installation is fed with up to 600/1000 V system voltage. Mechanical service life under motion is achieved by a flex rating of 5,000,000 bending cycles and a dynamic routing limit of 7.5×D, so cable carriers can be specified with short pitch lengths. A four-core layout of L conductors plus four 1.5 mm² auxiliaries provides separate brake and sensor supply inside a single sheath; this Basic cable design keeps cross-talk low for the power group. The product belongs to the Rexroth Cables group and is catalogued as the Motor-to-Junction segment, making ordering straightforward for plant standardization.
A robust PUR sheath in Orange RAL 2003 resists coolants while maintaining elasticity from -30 to +80 °C during operation; the same limits apply for transport and storage. The outside diameter of 29.8 mm fits standard M50 glands on the C-type terminal box mounted to the motor, and a static installation can be bent down to 5×D without conductor stress. System capacitance is kept to 0.6 nF/m, reducing common-mode leakage current into the drive. Together, these attributes let machine builders route long runs in drag chains, meet enclosure color codes, and maintain EMC compliance without additional suppression components.
Frequently Asked Questions about RLB2-113KEB:
Q: What is the conductor cross-section of the RLB2-113KEB cable?
A: The RLB2-113KEB power cable has a conductor cross-section of 25 mm².
Q: What is the current capacity of the RLB2-113KEB at 40 °C ambient temperature?
A: This cable can handle a current capacity of 93.9 A at 40 °C.
Q: What material and color is the outer jacket of the RLB2-113KEB?
A: The cable jacket is made of PUR with an orange color coded to RAL 2003.
Q: What is the dynamic bending radius specification for the RLB2-113KEB cable?
A: The minimum dynamic bending radius for this cable is 7.5 times the outer diameter.
Q: Which motor series and controllers are supported by the RLB2-113KEB cable?
A: The RLB2-113KEB is designed for use with MS2(X) series motors and ctrlX DRIVE controllers.
