RLB2-064HDB Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
13 Seconds
The Bosch Rexroth Indramat RLB2-064HDB is part of the RLB Motor Power Cables series and features a basic cable design with a cross section of 10 mm². This power cable supports ctrlX DRIVE controllers and MS2(X) motor series, offering 5,000,000 bending cycles and a dynamic bending radius of 7.5 times the cable diameter. It is suitable for operating temperatures from -30 to 80 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RLB2-064HDB is a motor power cable produced by Bosch Rexroth Indramat and supplied inside the RLB Motor Power Cables series. In automated cells it links a cabinet-mounted drive to a moving MS2 servo axis, carrying phase conductors, control pairs, and protective ground within one sheath. The assembly supports repetitive motion, tight-bend routing, and straightforward replacement, so it is applied on gantry loaders, handling modules, and packaging stations that run around the clock.
This variant follows the Basic cable design and belongs to the wider Rexroth Cables product group. Four line cores, four 1.0 mm² signal wires, and two 1.5 mm² protective conductors form the 4x L + 4x 1.0 mm² + 2x 1.5 mm² layout, and each phase conductor offers a cross-section of 10 mm² to limit voltage drop. Under continuous carrier motion the bundle accepts a dynamic bending radius of 7.5xD and has been qualified for 5,000,000 flex cycles, supporting rapid linear axes. Service temperatures range from -30 C to 80 C, allowing use in chilled storage areas as well as heated production zones.
The molded plug on the motor side uses an M58 connector that mates directly with MS2 housings, while the free end fits the ctrlX DRIVE terminal so no intermediate junction boxes are necessary. When clamped in place the cable must respect a static bend radius of 5xD to prevent conductor deformation. Electrical and mechanical parameters have been matched to ctrlX DRIVE controllers and to the MS2(X) motor series, yielding a direct motor-drive connection that reduces wiring time and maintains continuous shielding across the installation.
Frequently Asked Questions about RLB2-064HDB:
Q: What is the maximum number of bending cycles supported by the RLB2-064HDB power cable?
A: This cable supports up to 5,000,000 bending cycles, making it suitable for high-durability applications.
Q: What is the dynamic bending radius requirement for the RLB2-064HDB cable?
A: The RLB2-064HDB is designed for a minimum dynamic bending radius of 7.5 times the cable diameter.
Q: What type of motor connector does the RLB2-064HDB power cable utilize?
A: This model features a M58 motor connector for direct connection to compatible motors.
Q: Which controllers and motor series are supported by the RLB2-064HDB cable?
A: The cable is compatible with ctrlX DRIVE controllers and MS2(X) motor series.
Q: What are the minimum and maximum operating temperatures for the RLB2-064HDB power cable?
A: The RLB2-064HDB operates within a temperature range from -30°C to 80°C.
