RLB2-041ECB Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RLB2-041ECB is part of the RLB Motor Power Cables series and is designed for use with the ctrlX DRIVE controllers and MS2(X) motor series. This power cable features a PUR jacket, supports up to 22.6 A current carrying capacity, and has a rated voltage of 600/1000 V. It offers 5,000,000 bending cycles and uses an M40 power connector with a 2.5 mm² power wire cross section.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RLB2-041ECB belongs to the RLB Motor Power Cables series developed by Bosch Rexroth Indramat. It is a dedicated power lead for MS2(X) servo motors driven by ctrlX DRIVE controllers, supplying phase current and auxiliary signals between the cabinet inverter and the moving actuator. In automated machinery this cable maintains stable power delivery while allowing continuous carrier movement, and its orange PUR sheath and basic construction simplify routing for equipment integrators.
Three phase conductors with a cross section of 2.5 mm² give the assembly a continuous load capacity of 22.6 A. The insulation system is rated for 600/1000 V, matching the output limits of the ctrlX inverter. An auxiliary set of 4 × 1.0 mm² wires is included for brake or sensor supply. Conductor size corresponds to 14 AWG, easing selection of lugs and terminals in mixed-standard panels. At the motor end a threaded M40 power plug mates directly with the MS2(X) housing. The cable is categorised within the Rexroth Cables product group and uses an unshielded basic design to minimise diameter and weight.
The flex profile is designed for extended drag-chain duty, surviving 5,000,000 bending cycles when the dynamic radius stays within 7.5xD; fixed installations may bend down to 5xD. A resilient PUR jacket in RAL 2003 resists abrasion, oils and coolants without stiffening. Service is approved from -30 to +80 °C, and the same range applies to storage. Combined with the cable type designation as a power lead, these figures support deployment in high-speed gantries, compact robots and packaging axes where consistent electrical integrity and tight routing spaces are required.
