RL2-167MBB Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RL2-167MBB is part of the RL2 Motor Power Cables series. This basic design cable has a PUR jacket, is AWG1/0 with a cross section of 53 mm², and supports 5,000,000 bending cycles. It is free from halogen, silicone, and CFCs, and has a dynamic bending radius of 7.5 times the cable diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RL2-167MBB cable is manufactured by Bosch Rexroth Indramat as part of the RL2 Motor Power Cables series and serves as a dedicated power link between an IndraDrive inverter and a 2nd-generation synchronous motor. Within an automated cell this component replaces loose wiring with a single, factory-tested harness, simplifying installation and ensuring that motor current, brake supply, and protective earth all reach the machine axis without signal loss or electromagnetic interference.
The conductor set follows a 4x L + 4x 0.75 mm² topology, where four power cores carry the three-phase load while four auxiliary cores handle sensor or brake circuits. Each power core has a cross section of AWG1/0 (53 mm²), a size chosen to limit voltage drop in high-current servo duty. A tough outer sheath made of PUR resists coolants and abrasion, and its high-visibility Orange (RAL 2003) color supports machine safety labeling. The formulation is halogen-free, cfc-free, and silicone-free, so it will not emit corrosive gases or contaminate paint booths. A basic cable design keeps overall diameter low while maintaining compliance with the broader Rexroth Cable product group.
For dynamic routing in drag chains the cable withstands 5,000,000 reciprocating bends, reflecting a service life suitable for high-cycle pick-and-place robots. During motion the minimum curve is limited to a radius of 7.5xD, while stationary installation permits a tighter 4xD bend for compact cabinet entry. A direct motor-drive connection eliminates intermediate terminal boxes, reducing points of failure and keeping electromagnetic shielding continuous along the entire length. The assembly matches the mechanical demands of second-generation motors and maintains PUR jacket integrity despite constant flexing and exposure to cutting fluids.
Frequently Asked Questions about RL2-167MBB:
Q: How many bending cycles can the RL2-167MBB power cable withstand?
A: The RL2-167MBB cable supports over 5,000,000 bending cycles, making it suitable for continuous motion applications.
Q: What material is used for the outer jacket of the RL2-167MBB cable?
A: This cable uses a PUR jacket for enhanced durability and resistance to industrial wear.
Q: What is the cross section size of the RL2-167MBB cable conductors?
A: The RL2-167MBB features a cross section size of AWG1/0 (53 mm²).
Q: What type of connection does the RL2-167MBB cable provide between motor and drive?
A: The direct motor-drive connection is supported by the RL2-167MBB cable.
Q: Is the RL2-167MBB cable halogen-free for safe industrial use?
A: Yes, the RL2-167MBB cable is halogen-free, making it suitable for environments requiring low emission of toxic gases.
