RL2-166MBB Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RL2-166MBB is part of the RL2 Motor Power Cables series and features a basic cable design with a cross section of AWG1/0, or 53 mm². It uses PUR jacket material in RAL 2003 color and includes PP conductor insulation, supporting direct connection with an M50 connector size.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RL2-166MBB is a motor power cable produced by Bosch Rexroth Indramat for the RL2 Motor Power Cables series. It is intended for routing power between Rexroth second-generation servo motors and their drive controllers in automated cells, where continuous flexing and torsion are expected during axis motion.
The mechanical endurance of the cable is rated for 5,000,000 bending cycles, allowing installation in energy-chain or robotic applications. A copper conductor area of AWG1/0 cross-section supports high current flow at a maximum operating potential of 600/1000 V on the power cores. Dynamic handling is aided by a torsional limit of ±30 °/m torsion and a minimum dynamic bend radius of 7.5 × D dynamic bend radius. The design is classified as Basic, and the four power lines are paired with four 0.75 mm² signal leads to separate feedback circuits from motor phases. Polypropylene insulation surrounds each conductor, while the PUR outer sheath carries the orange RAL 2003 color for quick identification. Rated signal voltage is 450/750 V, and static routing may follow a 4 × D minimum bend guideline.
The internal core arrangement is described as 4x L + 4x 0.75 mm², terminated through a factory-molded M50 connector that allows direct connection to the motor without junction boxes. A tough PUR jacket resists oils and weld spatter, maintaining at least 20 MΩ/km insulation resistance at 20 °C to limit leakage currents. Connection to the cabinet side is direct, which shortens installation time and reduces contact points. The product belongs to the Rexroth Cable group and may operate under combined bending and torsion while remaining within its 2nd motor generation dimensional standards.
Frequently Asked Questions about RL2-166MBB:
Q: How many bending cycles can the RL2-166MBB cable withstand before failure?
A: This cable supports up to 5,000,000 bending cycles for enhanced durability in dynamic applications.
Q: What is the cable type and conductor configuration of the RL2-166MBB?
A: The RL2-166MBB features a 4x L + 4x 0.75 mm² cable configuration for efficient power transmission.
Q: What is the rated voltage capacity for power in the RL2-166MBB cable?
A: The RL2-166MBB power cable has a rated voltage of 600/1000 V for power applications.
Q: What jacket material and color are used on the RL2-166MBB power cable?
A: A jacket made from PUR in RAL 2003 color provides chemical and mechanical resistance.
Q: What type of connector and connection does the RL2-166MBB cable utilize?
A: This cable is equipped with a direct connection and uses an M50 connector size.
