RL2-046FBB Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
The Bosch Rexroth Indramat RL2-046FBB is a motor power cable from the RL2 Motor Power Cables series. This cable features a 12 AWG conductor with a cross section of 4.0 mm² and is rated for 29.5 Amps. It has a PUR orange jacket, is designed for 5,000,000 bending cycles, and uses an M40 power connector for 2nd generation motors.
Internal Product Review
The RL2-046FBB from Bosch Rexroth Indramat is a durable RL2 Motor Power Cable featuring a 12 AWG conductor and a basic cable design. Its PUR jacket and M40 power connector support reliable connections for 2nd generation motors, while the cable handles up to 29.5 A and withstands 5,000,000 bending cycles. This model stands out for long-term flexibility and robust performance in demanding motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RL2-046FBB motor power cable is produced by Bosch Rexroth Indramat for the RL2 Motor Power Cables series. Designed for machine tools and handling modules, it carries drive output from a Rexroth inverter to second-generation servomotors while withstanding constant travel in cable carriers. The cable belongs to the Rexroth Cable product group and delivers three-phase power with auxiliary signal lines in a single, application-matched assembly. This combined arrangement reduces the number of separate cable runs required between the drive and motor.
The cable has a basic construction that uses tinned copper conductors of 12 AWG with an equivalent cross-sectional area of 4.0 mm². These conductors support a continuous load of 29.5 A without exceeding thermal limits. Flex-rated insulation maintains its integrity when the cable bends to a dynamic radius of 7.5 × D, enabling repeated movement in automated gantries and drag-chain systems. The cable has a mechanical service life of 5,000,000 cycles under repeated flexing conditions. The outer sheath is molded from PUR, which resists cutting fluids and provides protection against abrasion during movement. Its high-visibility orange color, corresponding to RAL 2003, also makes the cable easier to identify among other wiring in crowded machine installations.
For fixed installation, a minimum bend radius of 5 × D helps prevent conductor fatigue at panel entries or junction boxes. The motor end terminates in an armored M40 power connector that matches the sealing interface on Rexroth second-generation motors. The power cores are rated for 600/1000 V, while the separately insulated signal pair carries up to 450/750 V for brake or feedback circuits. This arrangement permits power and auxiliary circuits with different voltage ratings to operate within the same cable assembly. The armored connector protects the termination where the cable meets the motor, while the fixed-installation bend limit supports routing through stationary sections of the machine.
