RL2-024CBB Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The RL2-024CBB is a motor power cable manufactured by Bosch Rexroth Indramat as part of the RL2 Motor Power Cables series. It has a cross section of 1.0 mm² and supports a rated voltage of 600/1000 V for power wires. The cable is designed for at least 5 million bending cycles, features a PUR jacket in orange, and has a dynamic bending radius of 7.5 times the cable diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RL2-024CBB is a motor power cable produced by Bosch Rexroth Indramat for the RL2 Motor Power Cables series. Classified under the Rexroth Cable product group, it connects second-generation drive motors to their servo amplifiers. The cable carries three-phase power and auxiliary signals required for controlled motion in assembly lines, robotic axes, packaging equipment, and other automated machinery. Its basic construction provides consistent electrical characteristics and a moderate outside diameter, allowing the cable to fit into standard routing trays and machine cable paths.
The cable contains eight conductors arranged in a 4 × 1.0 mm² + 4 × 0.75 mm² configuration. The four power conductors each have a cross-sectional area of 1.0 mm², while the four smaller conductors carry encoder or brake reference signals. The power conductors are rated for 600/1000 V, allowing them to handle the bus voltages used by compatible industrial drive systems. The auxiliary conductors withstand up to 450/750 V without dielectric failure. A minimum insulation resistance of 20 MΩ/km helps limit leakage current over long cable runs. The outer sheath is made from PUR, which resists oil and protects the cable from abrasion as it moves through plastic carrier chains.
During dynamic operation, the cable supports a minimum bending radius of 7.5 × D, where D represents its outside diameter. Fixed installations permit a tighter minimum bending radius of 5 × D inside control panels or stationary cable routes. Its rated service life exceeds 5 million flex cycles at the stated dynamic bending radius, supporting repetitive movement in pick-and-place equipment and high-speed gantries. The copper conductors tolerate temperatures up to 90 °C in fixed installations and up to 80 °C during continuous movement. An orange outer jacket in RAL 2003 improves cable visibility inside crowded ducts and carrier systems. The flexible sheath and conductor arrangement allow the cable to follow repetitive machine motion while maintaining power delivery and auxiliary signal transmission.
