RL2-022DBB Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
The Bosch Rexroth Indramat RL2-022DBB is part of the RL2 Motor Power Cables series and features a basic cable design with a cross section of 1.5 mm². The cable type is 4x L plus 4x 0.75 mm², and it uses a PUR orange jacket with a maximum conductor temperature of 90°C. This cable has an M23 connector size and supports a minimum bend radius of 5 times the diameter when fixed and 7.5 times the diameter when flexed.
Internal Product Review
The RL2-022DBB is a Bosch Rexroth Indramat RL2 Motor Power Cable featuring a basic cable design and a durable PUR jacket in a highly visible orange color. Its M23 connector and 1.5 mm² cross section provide solid electrical performance for 2nd generation motors. This cable stands out for its reliable long-term operation in demanding industrial environments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat produced the RL2-022DBB motor lead within the RL2 Motor Power Cables series. As part of the Rexroth Cable product group, this assembly routes three-phase output from an IndraDrive or similar inverter to the stator terminals of a second-generation Rexroth servo motor. Its geometry, shielding, and resistance characteristics accommodate the dynamic current peaks encountered in high-cycle automation tasks. The cable serves as a power connection in machine tools, packaging lines, and material-handling axes where repetitive motion and consistent electrical performance are required.
The RL2-022DBB uses a conductor layout of 4 × 1.5 mm² load conductors and 4 × 0.75 mm² auxiliary conductors. The load conductors carry motor power, while the smaller auxiliary conductors support temperature monitoring or brake circuits. A factory-installed M23 circular connector terminates the motor end, allowing direct connection without field crimping. The copper conductors support continuous operation at temperatures up to 90 °C in fixed installations, reducing the need for thermal derating near warm drive cabinets. The outer jacket is made from PUR, a polyurethane material that resists cutting oils, weld spatter, and abrasion from drag-chain movement. The cable uses a Basic shielding concept for installations with typical levels of electromagnetic interference.
The jacket has an orange RAL 2003 finish, which distinguishes energized motor leads from signal wiring in control troughs. Stationary routing requires a minimum bend radius of 5 × D to prevent excessive mechanical stress on the conductors and insulation. Energy-chain applications require a minimum bend radius of 7.5 × D to limit conductor fatigue during repeated movement. Compatibility with the second-generation motor platform ensures that the connector pin arrangement and insulation system align with the applicable resolver and brake layouts. The abrasion-resistant jacket supports routing through moving cable carriers, while the color coding makes the lead easier to distinguish during panel and machine wiring. Proper bend-radius control also helps preserve the shielding geometry and conductor arrangement throughout repeated operating cycles.
