RL2-003CBB Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RL2-003CBB is part of the RL2 Motor Power Cables series and features a basic cable design with a cross section of 1.0 mm². This power cable has a PUR jacket, is halogen-free and silicone-free, and supports 5,000,000 bending cycles. It uses an electrical connection type D (M17) and has a dynamic minimum bend radius of 7.5 times the cable diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RL2-003CBB motor power cable is produced by Bosch Rexroth Indramat within the RL2 Motor Power Cables series. Intended for routing drive current between in-cabinet inverters and field-mounted motors, this cable supports dynamic motion axes in industrial automation cells. The assembly follows Rexroth cable product group standards, combining a flexible conductor bundle with a PUR outer jacket so mobile gantries, robots, and transfer units can operate without intermittent wiring faults.
Its mechanical life is rated for 5,000,000 bending cycles, a figure that indicates how many flex movements the cable can endure in continuous-flex chains before the conductor strands fatigue. The conductor arrangement follows a 4 x L + 4 x 0.75 mm² layout identified as the basic cable design; four power cores carry phase voltage while the smaller conductors carry brake or sensor feeds. Each power core offers a cross-section of 1.0 mm², matching the drive current requirements of compact servo motors. Termination at the motor end is handled by a D (M17) quick-lock circular connector, which simplifies cable connection at the motor. Protection against cutting fluids and abrasion is provided by a PUR jacket in orange RAL 2003.
Dynamic routing in cable tracks is supported by a minimum flex radius of 7.5 x D, letting designers shorten trough lengths without overstressing the insulation. Compatibility with second-generation motors enables direct connection to IndraDrive servo families released after the MNR update. To reduce emissions during fire events, the cable is built with a halogen-free and silicone-free compound, and its formulation is also CFC-free. No silicone migrates from the jacket, so adjacent painted surfaces can cure properly. The absence of halogens helps reduce corrosive gas formation on steel machinery. The cable is commonly used on gantry systems, pick-and-place units, and similar high-cycle installations where repeated motion is expected.
