RL2-002CBB Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RL2-002CBB is part of the RL2 Motor Power Cables series. This cable features a basic design, PUR jacket material in orange, and supports up to 5,000,000 bending cycles. It has a cross section of 1.0 mm², rated voltage of 600/1000 V for power, and a conductor maximum temperature of 90°C when fixed.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RL2-002CBB is a motor power cable produced by Bosch Rexroth Indramat as part of the RL2 Motor Power Cables series. It links drive controllers to second-generation synchronous motors in automated production equipment, carrying three-phase power and auxiliary signal lines through a single routed assembly. By combining power conductors and signal cores inside one flexible jacket, the cable simplifies machine wiring, reduces installation time, and maintains stable electrical characteristics in constantly moving axes. Its preterminated ends and keyed connector shells support rapid plug-in installation when the cable must be removed for service.
The cable is rated for 5,000,000 flex cycles, indicating how many direction changes it can withstand in an energy chain. A PUR outer jacket in RAL 2003 orange resists abrasion and oils while remaining visible around machinery. The conductor set uses a 4 × L + 4 × 0.75 mm² arrangement, separating three motor phases, protective earth, and four signal cores beneath a common braid. In fixed routing, the copper strands may reach 90 °C without damaging the insulation, while applications involving continuous motion are limited to 80 °C. The power cores carry 600/1,000 V, while the signal cores are rated for 450/750 V. The cable has a basic design without a shield drain wire, which should be considered when grounding the surrounding equipment.
In dynamic routing, the minimum bending radius is 7.5 × D, where D represents the cable’s outer diameter. This limit helps prevent conductor strand damage during rapid carriage travel and repeated movement through energy chains. For static cabinet drops, the minimum bending radius is 5 × D, supporting tighter routing behind panel hinges and within fixed cable channels. The motor end terminates in an M17 (D) circular connector that mates directly with compatible motor housings and eliminates field crimping at that connection. A core cross-sectional area of 1.0 mm² balances voltage-drop control with the flexibility needed for moving machinery. The cable belongs to the Rexroth Cable product group and can be routed alongside compatible feedback and brake leads when the required separation and bend clearances are maintained.
