RL2-001CBT Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RL2-001CBT is part of the RL2 Motor Power Cables series and features a torsion cable design suited for the 2nd generation motors. It has a cross section of 1.0 mm², an orange PUR jacket, and is equipped with an M17 power connector. The cable supports a dynamic bending radius of 7.5 times the cable diameter and a maximum torsion of ±180° per 30 cm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RL2-001CBT is a motor power cable produced by Bosch Rexroth Indramat within the RL2 Motor Power Cables series. Intended for use in industrial automation, the cable carries three-phase power and auxiliary signals between drive controllers and corresponding motors. Its construction supports the electrical requirements of second-generation Rexroth motors while maintaining flexibility for routing through cable chains and robotic joints. By simplifying the connection of remote servo axes, it helps maintain reliable energy transfer in dynamic motion tasks.
One performance feature is its Torsion-rated design, meaning the conductors and shield remain electrically stable when the cable twists repeatedly around its longitudinal axis. The internal layout identified as 4x L + 4x 0.75 mm² separates power lines from control cores, allowing simultaneous transmission of motor phase current and brake or sensor signals. Each copper conductor presents a nominal area of 1.0 mm², so voltage drop stays within drive tolerances over standard machine lengths. During continuous movement, the cable may bend to a dynamic radius of 7.5xD, reducing mechanical stress in drag-chain installations. An outer jacket colored Orange (RAL 2003) provides clear identification for energized wiring, while its PUR sheath resists abrasion, lubricants, and weld splatter often encountered on factory floors.
Further mechanical resilience is defined by a permissible torsional displacement of ±180°/30 cm, enabling robotic wrists to rotate without cable fatigue. The factory-fitted M17 Power Connector matches the pinout and locking profile of the company’s second-generation motors, reducing assembly time and preventing wiring errors. When stationary, installers must respect a minimum bending radius of 5xD to avoid conductor kinking. Classified in the Rexroth Cable product group, the model ensures consistent material compatibility across the complete power-train lineup.
Frequently Asked Questions about RL2-001CBT:
Q: What is the cable design of the RL2-001CBT motor power cable?
A: The RL2-001CBT motor power cable features a torsion design for flexible installation.
Q: What type of connector is used on the RL2-001CBT cable for motor connection?
A: This cable comes equipped with an M17 power connector for motor connection.
Q: What material is the outer jacket of the RL2-001CBT cable made from?
A: The jacket is made from PUR material, providing durability and resistance to common industrial conditions.
Q: What is the maximum torsion capability of the RL2-001CBT cable?
A: The RL2-001CBT supports a maximum torsion of ±180° per 30 cm length.
Q: What is the jacket color specification for the RL2-001CBT power cable?
A: This model features a jacket in orange, conforming to RAL 2003.
