RL2-001CBB Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
The Bosch Rexroth Indramat RL2-001CBB is a power cable from the RL2 Motor Power Cables series, designed for second generation MS2x motors with Plug D and direct connection to IndraDrive systems. This basic cable variant features a cross section of 1.0 mm², supports up to 5,000,000 bending cycles, and operates within a temperature range of -30°C to 80°C. It uses an M17 power connector and has a minimum bending radius of 7.
Internal Product Review
The RL2-001CBB is a Bosch Rexroth Indramat motor power cable designed for use with IndraDrive systems and MS2x motors featuring plug D. Its robust construction supports up to 5,000,000 bending cycles and maintains flexibility with a minimum dynamic bend radius of 7.5xD. This cable is well-suited for demanding motion applications requiring consistent performance and reliable power delivery.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RL2-001CBB is a motor power cable manufactured by Bosch Rexroth Indramat as part of the RL2 Motor Power Cables series. Classified within the Rexroth Cable product group, it is offered in the Basic design as a dedicated power cable for second-generation servo systems. The cable supplies three-phase power from an IndraDrive inverter through a direct connection to an MS2x motor without intermediate junctions. Within an automation cell, it delivers current while maintaining the flexibility needed to route moving axes through energy chains or articulated assemblies.
The cable has a conductor layout of 4 × 1.0 mm² + 4 × 0.75 mm², which places four power cores and four smaller auxiliary wires under one jacket. This arrangement simplifies routing between the control cabinet and machine frame while providing suitable current capacity for standard servo cable lengths. The motor-side connection uses a compact M17 power connector that couples directly to the corresponding motor housing. At the drive end, the cable mates with terminals used on IndraDrive amplifiers. Its pinout is compatible with MS2x motors equipped with plug D, allowing a direct connection between the drive and motor. The combined wiring arrangement also keeps auxiliary conductors organized alongside the power cores while the cable shield helps limit electrical interference.
The cable is rated for 5,000,000 bending cycles, allowing continuous operation in dynamic cable tracks used on pick-and-place gantries and other moving machinery. During dynamic operation, the cable requires a minimum bend radius of 7.5 × D to reduce stress on its conductors and jacket. Static installations permit a tighter minimum bend radius of 5 × D without causing compressive damage. The thermoplastic insulation remains stable from −30 °C to 80 °C, supporting operation during cold starts and at elevated temperatures associated with sustained duty. These temperature limits also accommodate routing through machinery and control cabinets where operating conditions may vary over the course of a production cycle.
