RKL4800 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
The Bosch Rexroth Indramat RKL4800 power cable belongs to the RKL Motor Power Cables series and is a ready-made cable with a bulk type of INK0670. It supports up to 5,000,000 bending cycles, features PUR jacket material, and is designed for use in drag chains. The cable has a power wire cross-section of 0.75 mm² and a control wire cross-section of 0.5 mm².
Internal Product Review
The RKL4800 is a ready-made power cable from the RKL Motor Power Cables series, equipped with a durable PUR jacket and supporting up to 5,000,000 bending cycles for reliable use in demanding drag chain applications. It features RLS0745/KM75 and RLS1701/C01 connectors for seamless controller and motor integration. This model stands out for flexibility and long service life in dynamic motion environments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKL4800 cable is produced by Bosch Rexroth Indramat for the RKL Motor Power Cables series. Classified as a motor power cable, it provides a dedicated connection between an IndraDrive servo amplifier and a compatible rotary or linear motor. By combining three-phase power conductors with low-voltage control conductors in a single jacket, the assembly simplifies wiring in industrial automation cells and reduces the amount of cabinet space required for separate cable runs. This arrangement also allows power and auxiliary signals to follow the same routing path between the drive and motor.
This assembly is built from bulk cable type INK0670 and is delivered as a ready-made harness, eliminating the need for field crimping. Its service life is rated for 5,000,000 flexing cycles, supporting repeated movement in applications such as robotic equipment, gantries, and automated handling systems. On the controller side, an RLS0745/KM75 circular connector provides keyed engagement to help prevent incorrect alignment during connection. The motor end terminates with an RLS1701/C01 plug that connects to the motor housing without additional adapters. Two shielded control conductors, each with a cross-sectional area of 0.5 mm², carry temperature sensor or brake signals independently of the power conductors. During motion, the cable requires a minimum dynamic bending radius of 7.5 × D to limit stress on the conductor strands and reduce the risk of jacket damage.
A durable PUR outer jacket resists coolants, oils, and abrasion, allowing the cable to operate in long-travel drag chains. Each of the three power cores uses a 0.75 mm² conductor, providing current capacity for small to medium-frame servo motors while preserving cable flexibility. For stationary routing, a minimum static bending radius of 5 × D helps prevent permanent deformation near clamps and fastening points. The cable is approved for drag-chain systems where repeated bending occurs during normal machine operation. Its molded motor connector provides a secure interface at the motor housing, while the combined conductor arrangement keeps power, brake, and temperature-sensor connections within one cable assembly.
