RKL4767 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RKL4767 is a power cable from the RKL Motor Power Cables series featuring total shield protection and a PUR jacket in RAL 2003 orange. The cable supports a power core cross-section of 10.0 mm², an outer diameter of 22.2 mm, and is compatible with drag chain applications. It uses RLK1401 and RLS1302/C10 connectors and has conductor resistance of 1.91 Ohm/km at 20°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKL4767 belongs to the RKL Motor Power Cables series from Bosch Rexroth Indramat. It is a pre-assembled motor lead intended to route drive output power to synchronous or asynchronous motors inside automated cells, ensuring a defined impedance and screened construction between the controller and the machine actuator. Factory-installed circular connectors at both ends shorten installation time and maintain EMC compliance on production lines where downtime must be minimized.
The cable is manufactured from bulk type INK0605, so its conductor geometry and insulation match the RKL portfolio’s electrical parameters. A power-core cross-section of 10.0 mm² supports drive currents typical of medium-frame motors while limiting voltage drop over standard machine lengths. Copper strands exhibit a specific resistance of 1.91 Ω/km, which defines the ohmic losses and heating under continuous load. An overall diameter of 22.2 mm balances mechanical robustness with routing flexibility in crowded cable tracks. The outer sheath is molded from PUR; this thermoplastic elastomer resists cutting oils, hydrolysis, and abrasion, so the assembly withstands repetitive machine motion and chemical exposure.
The sleeve is produced in RAL 2003 orange for quick identification among signal harnesses, and its insulation system is rated for conductor temperatures up to 80 °C to cover most cabinet and machine-side ambient limits. When laid permanently the cable may be bent to a radius of 5 × D, while dynamic applications such as energy chains require a larger radius of 7.5 × D to avoid conductor fatigue. Continuous motion is supported by the drag-chain compatible design, aided by a total shield that suppresses common-mode noise from pulse-width modulated drives. An RLK1401 motor-side plug mates directly with Rexroth servo motors, and the RLS1302/C10 connector at the inverter end simplifies field replacement without on-site crimping.
Frequently Asked Questions about RKL4767:
Q: Is the RKL4767 motor power cable suitable for drag chains usage?
A: The RKL4767 cable is compatible with drag chain systems for continuous flexing applications.
Q: What is the jacket material of the RKL4767 motor power cable?
A: This cable features a PUR jacket for enhanced durability and abrasion resistance.
Q: What is the maximum operating temperature of the RKL4767 cable's wire?
A: The maximum allowable wire temperature for the RKL4767 is 80°C.
Q: What is the conductor resistance of the RKL4767 cable at 20°C?
A: The total conductor resistance at 20°C for this model is 1.91 Ohm/km.
Q: What is the power core cross-section size of the RKL4767 cable?
A: The power core cross-section of the RKL4767 cable is 10.0 mm².
