RKL4761 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RKL4761 is a power cable from the RKL Motor Power Cables series with a PUR jacket in RAL 2003 orange and an overall diameter of 18.5 mm. It features three 6.0 mm² power conductors plus PE, two 1.0 mm² and two 1.5 mm² auxiliary conductors, and supports a power rated voltage of 300/500 V. The cable allows a minimum bending radius of 5 times the diameter when fixed and 7.5 times when flexible.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKL4761 is a motor power cable manufactured by Bosch Rexroth Indramat for the RKL Motor Power Cables series. It interconnects a Rexroth drive controller with a compatible servo motor so that three-phase energy, protective earth and low-level control lines reach the machine axis through one routed bundle. The assembly is supplied as a ready-to-install harness, reducing on-site wiring tasks in industrial automation cells.
The cable occupies a circular envelope of 18.5 mm, yet its core set includes a robust 6.0 mm² trio plus earth to transfer motor current. Those power cores are identified as 3 + PE and withstand a continuous potential of 300/500 V. Copper conductor resistance is limited to 3.30 Ω/km, keeping voltage drop low over long machine runs. A fixed-lay installation may follow a minimum curvature of 5 × D, letting builders route the jacketed bundle along cabinet corners without stressing the insulation. Two auxiliary pairs, sized 2×1.0 mm² and 2×1.5 mm², carry temperature or brake signals, while the control cores observe a 300/300 V rating suited to typical encoder or sensor voltages. Bulk cable designation INK0604 identifies the underlying raw cable for service replacement.
Dynamic motion axes benefit from a flexible bend limit of 7.5 × D, allowing the RKL4761 to operate inside moving cable chains. A tough PUR outer sheath resists cutting oils and abrasion, and its high-visibility RAL 2003 (Orange) colour aids maintenance tracing. Factory-crimped RLS1202/C06 contacts form the controller-side connector, while the motor end terminates in the RLK1301 plug to match Rexroth motor housings. Together these molded plugs provide strain relief and IP-rated sealing so the assembly sustains motion cycles with minimal downtime.
Frequently Asked Questions about RKL4761:
Q: What is the configuration and size of power conductors in the RKL4761 cable?
A: The RKL4761 power cable uses 3 power conductors plus PE, each with a cross-section of 6.0 mm².
Q: What is the minimum bending radius for fixed setups of the RKL4761 cable?
A: For fixed installation, the minimum bending radius is 5 times the overall cable diameter.
Q: What material is used for the outer jacket of the RKL4761 cable?
A: The RKL4761 features a PUR (Polyurethane) outer jacket for enhanced durability.
Q: Which connector is used for the motor-side connection on the RKL4761 cable?
A: The motor-side connection for the RKL4761 cable uses the RLK1301 connector.
Q: What is the overall cable diameter of the RKL4761 model from Bosch Rexroth Indramat?
A: The RKL4761 power cable has an overall diameter of 18.5 mm, allowing for easy routing in cable trays.
