RKL4736 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RKL4736 is part of the RKL Motor Power Cables series and has a cable diameter of 29.8 mm. This power cable is designed for 5,000,000 bending cycles and supports drag chain use. It features a PUR jacket in RAL 2003 orange, with a typical capacitance of 1.1 nF per meter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKL4736 is a motor power cable manufactured by Bosch Rexroth Indramat as part of the RKL Motor Power Cables series. It serves as the primary energy link between drive inverters and synchronous motors, carrying both power and low-level control leads in a single composite jacket. The cable is intended for industrial automation layouts that demand frequent linear movement, permitting installation in drag-chain carriers without signal loss or mechanical fatigue. It suits packaging machines, palletizers, and material-handling axes where constant repositioning places high stress on cabling.
The cable’s outer diameter is 29.8 mm, accommodating three power cores with a cross-section of 25.0 mm² that transfer high currents to the motor. A dedicated auxiliary pair sized at 1.5 mm² enables brake release or sensor supply while sharing the same sheath. Typical mutual capacitance of 1.1 nF/m influences common-mode currents, and the loop resistance remains at 0.78 Ω/km when measured at 20 °C, aiding voltage-drop calculations. The generous insulation thickness buffers electromagnetic interference and improves dielectric strength between adjacent cores. Taken together, these electrical parameters allow engineers to predict heating, select fuses, and set maximum permissible installation length.
The polyurethane sheath is a matte, adhesion-free PUR compound finished in the industry-recognised RAL 2003 orange for clear cable identification. In dynamic carriers the assembly withstands up to 5,000,000 bending cycles provided the loop diameter is held to at least 7.5 x D; for fixed routing the minimum radius is 5 x D. With approval for drag-chain operation, the layered conductor stranding and PUR jacket prevent cracking, abrasion, and conductor migration during continuous acceleration. This mechanical resilience supports 24-hour duty in high-speed assembly lines.
Frequently Asked Questions about RKL4736:
Q: How many bending cycles can the Bosch Rexroth RKL4736 cable withstand?
A: The RKL4736 cable is rated for 5,000,000 bending cycles, making it suitable for highly flexible applications.
Q: What is the power conductor cross-section of the RKL4736 cable?
A: This cable features a power conductor cross-section of 25.0 mm² for efficient power transmission.
Q: What material and finish is used for the jacket of the RKL4736 cable?
A: The jacket of the RKL4736 is made from PUR material that is adhesion-free and has a matte finish.
Q: Is the RKL4736 cable designed for use in drag chain applications?
A: The RKL4736 cable is suitable for drag chain use, supporting dynamic movement requirements.
Q: What is the cable diameter of the Bosch Rexroth RKL4736 model?
A: The outer diameter of the RKL4736 cable is 29.8 mm, allowing it to fit specific routing needs.
