RKL4732 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RKL4732 is a power cable from the RKL Motor Power Cables series with a jacket made of PUR and an outer diameter of 18.5 mm. It features a phase conductor cross-section of 6.0 mm² and a power wire voltage rating of 600 V AC. The cable construction is [4x6.0mm²+(2x1.0mm²)StC+(2x1.5mm²)StC]C, and it offers a dynamic bending radius of 7.5 times the cable diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKL4732 is a motor power cable produced by Bosch Rexroth Indramat and grouped within the RKL Motor Power Cables series. It links an IndraDrive controller to a synchronous or asynchronous motor so that three-phase power, protective earth, and control cores can be routed in a single shielded assembly for industrial automation axes that demand coordinated motion and low electrical noise.
This cable is supplied as bulk type INK0604, a designation that identifies its insulation and shield structure. Inside the sheath the core layout follows the pattern [4x6.0 mm²+(2x1.0 mm²)StC+(2x1.5 mm²)StC]C; four 6 mm² phase conductors carry the drive current, while two signal pairs with overall copper braids support temperature or brake circuits. Its mutual capacitance is rated at 0.8 nF/m, limiting charging currents on long runs, and the loop resistance is 3.30 Ohm/km at 20 °C, a value that guides permissible length before voltage drop becomes critical. The black outer jacket brings the overall diameter to 18.5 mm, and both the phase and PE conductors share a 6 mm² cross-section suited for circuits up to 600 V AC.
Mechanical service life is enhanced by a PUR jacket, denoted by the flexible and abrasion-resistant material tag PUR. When the cable is installed in energy chains the dynamic bend radius must not fall below 7.5xD, while stationary routing allows a 5xD static radius. Factory-terminated plugs simplify connection; the drive end is fitted with a RLS0723 (K06) angled hybrid connector, and the motor end uses the keyed RLK1401 coupling to match standard Rexroth motor housings. These connectors keep the shield intact, reduce assembly time, and preserve EMC compliance during high-frequency drive switching.
Frequently Asked Questions about RKL4732:
Q: What is the jacket material used on the RKL4732 motor power cable?
A: The RKL4732 features a PUR jacket, which provides durability and chemical resistance.
Q: What is the voltage rating for the power wires in the RKL4732 cable?
A: This cable supports a power wire voltage rating of 600 V AC.
Q: What is the dynamic bending radius of the Bosch Rexroth RKL4732 cable?
A: The RKL4732 has a dynamic bending radius of 7.5 times the cable diameter.
Q: What is the conductor resistance of the RKL4732 at 20°C ambient temperature?
A: The conductor resistance at 20°C for this cable is 3.30 Ohm per kilometer.
Q: What is the outer diameter of the Bosch Rexroth RKL4732 cable?
A: The outer diameter of the RKL4732 cable is 18.5 mm, allowing for compatibility with various cable management systems.
