RKL4722 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RKL4722 is part of the RKL Motor Power Cables series and has a conductor structure of 4x6.0 plus 2x1.0 plus 2x1.5 mm². It features a PUR jacket material, supports a rated power voltage of 500 V, and offers a bending radius of 5xD when fixed and 7.5xD when flexible. This cable is designed for up to 5,000,000 bending cycles and has an outer diameter of 18.5 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKL4722 motor power cable is produced by Bosch Rexroth Indramat for its RKL Motor Power Cables series. It is supplied as a ready-made interface between Rexroth drive controllers and synchronous motors in automated lines. Besides delivering three-phase power it carries brake control and feedback conductors, allowing the controller to regulate motion without additional harnesses. The cable is intended for continuously moving cable chain installations where electrical integrity must be preserved over millions of cycles.
In dynamic applications the cable withstands up to 5,000,000 bending cycles, a value that quantifies its life in drag-chain use. When routed in a fixed tray the minimum bend diameter is 5xD, whereas moving runs must respect a 7.5xD radius to avoid conductor fatigue. Power loss is held down by a specific resistance of 3.30 ohm/km measured at 20 °C, so voltage drop remains low even on long axes. The outer sheath measures 18.5 mm in diameter, letting the assembly share confined tracks with pneumatic tubing. A GNYE protective conductor is integrated for a consistent ground reference across the machine frame.
The electrical and mechanical profile is completed by the bulk cable designation INK0604, which groups the internal copper as 4x6.0 + 2x1.0 + 2x1.5 mm². The outer covering uses a robust PUR compound that resists cuts, coolants, and micro-cracking during motion. On the drive side an RLS0721 (K06) plug mates directly with IndraDrive controller terminals, while the motor side is equipped with an RLK1301 coupling marked for fast orientation. Control cores carry up to 300 V, and the power cores handle a maximum of 500 V, enabling simultaneous supply and low-level signalling along one composite lead without electromagnetic interference to adjacent cables.
Frequently Asked Questions about RKL4722:
Q: How many bending cycles can the Bosch Rexroth Indramat RKL4722 cable withstand?
A: The RKL4722 cable offers a bending cycle durability of 5,000,000 cycles for long-lasting flexibility in moving applications.
Q: What is the jacket material used on the RKL4722 motor power cable?
A: The RKL4722 features a PUR (polyurethane) jacket, providing enhanced resistance to abrasion and chemicals.
Q: What are the bending radius specifications for the RKL4722 cable in fixed and flexible installations?
A: The RKL4722 uses a fixed bending radius of 5x the cable diameter and a flexible bending radius of 7.5x the diameter, ensuring reliable performance in both stationary and dynamic situations.
Q: Which connector is provided on the motor-side of the RKL4722 power cable?
A: The motor-side connector for the RKL4722 cable is the RLK1301 model.
Q: What are the rated voltage specifications for the RKL4722 cable's power and control circuits?
A: The RKL4722 cable is rated for 500 V on power conductors and 300 V on control conductors.
