RKL4711 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
39 Seconds
The Bosch Rexroth Indramat RKL4711 is a power cable from the RKL Motor Power Cables series, featuring a direct connection mode and operating at 300 V. It is rated for use in drag chains, with a power wire cross section of 6.0 mm² and a control wire cross section of 1.5 mm². The cable supports a fixed bending radius of 5 times the diameter and a flexible bending radius of 7.5 times the diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKL4711 is a motor power cable produced by Bosch Rexroth Indramat as part of the RKL Motor Power Cables series. The assembly is specified for linking an Indramat drive controller to its matched servo motor in automated systems ranging from pick-and-place gantries to packaging lines. By combining power leads with integrated control cores it helps reduce cabinet space, shortens wiring time, and ensures coordinated transmission of drive power and low-level command signals along the machine axis.
For fixed routing inside a cabinet the cable permits a minimum bend of 5 × D, while dynamic tracks can fold it down to 7.5 × D without exceeding the conductor stress limit. The three power cores each have a cross-section of 6.0 mm², providing adequate ampacity for motors supplied at up to 300 V. Parallel to these conductors run four signal wires, each sized at 1.5 mm², that carry enabling, temperature, or brake commands. Together these parameters define both the permissible mechanical curvature and the electrical loading envelope when the cable operates continuously under servo duty cycles.
The RKL4711 is assembled from bulk cable type INK0604 and is terminated for plug-and-play use. At the controller end it mates with the RLS0723 (K06) interface, and at the motor end it locks to an RLK1201 connector, allowing a straight-through Direct Connection without intermediate terminals. Four individually shielded control conductors, indicated by the value 4, maintain signal integrity beside the power trio. A reinforced outer jacket rated for drag-chain use lets the cable endure millions of cycles in moving energy chains while sustaining the specified bending radii and preventing insulation fatigue.
Frequently Asked Questions about RKL4711:
Q: Can the Bosch Rexroth Indramat RKL4711 cable be used in drag chain systems?
A: The RKL4711 cable is designed for use in drag chains, making it suitable for dynamic motion applications.
Q: What is the maximum operating voltage supported by the RKL4711 cable's power wires?
A: The operating voltage for the power wires in the RKL4711 is 300 V.
Q: What bulk cable type is used in the RKL4711 motor power cable?
A: The bulk cable type used for the RKL4711 model is INK0604, ensuring compatibility and specification adherence.
Q: What is the power wire cross-sectional area in the RKL4711 cable?
A: The RKL4711 features a power wire cross section of 6.0 mm² for reliable power transmission.
Q: How many control conductors are present in the RKL4711 cable?
A: There are four separate control conductors included in the RKL4711 power cable.
