RKL4594 Bosch Rexroth Indramat

Ask for Availability

Preparing your secure checkout page...

The Bosch Rexroth Indramat RKL4594 is part of the RKL Motor Power Cables series and features a cable construction of 4x10.0 mm², 2x1.0 mm², and 2x1.5 mm², with an overall cable diameter of 22.2 mm. The cable jacket is made from PUR in RAL 2003 orange and supports operating voltages of 300/300 V for control and 300/500 V for power applications.

Warranty
Wake Industrial Warranty

Quote Request Form:

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The RKL4594 is a motor-power cable produced by Bosch Rexroth Indramat for the RKL Motor Power Cables series. In automation cabinets it links servo drives to synchronous motors, supplying three-phase power and auxiliary control cores through a single routed harness. Using this cable simplifies installation of linear axes, gantries, and tool changers where electromagnetic compatibility and mechanical durability are critical.

The assembly follows the AEH/RKS+INK0605-RLS0721 configuration, meaning the molded motor connector, encoder junction, and strain-relief sleeve are pre-terminated at the factory. Inside the sheath a balanced layout of 4x10.0 + 2x1.0 + 2x1.5 mm² conductors carries mains, brake, and sensor circuits while limiting crosstalk. The outer diameter is held to 22.2 mm (±1 mm), so existing carrier chains and glands can be reused without resizing. Power cores rated for 300/500 V accommodate standard IndraDrive output stages, and a conductor resistance of 1.91 Ω/km keeps voltage drop low on dynamic axes with long cable runs.

A distributed capacitance of 1.0 nF/m reduces common-mode noise when inverter switching frequencies are high. The PUR jacket is colored RAL 2003 orange for quick identification and offers abrasion resistance in drag-chain applications. For stationary routing the wire can continuously endure up to +90 °C; in flexing loops the temperature ceiling is lower to preserve insulation life. Mechanical stress is managed by a minimum bend radius of 5 × D in fixed routing, allowing tight cabinet turns without damaging the cores or shielding.

Wake Industrial stocks this cable, backs each purchase with a 1-year warranty, and can arrange same-day shipping when schedules are tight; quotations issued for this model remain valid for 30 days.

Assembly Configuration
AEH/RKS+INK0605-RLS0721
Cable Construction
4x10.0 + 2x1.0 + 2x1.5 mm^2
Cable Od
22.2 mm (+/-1.0 mm)
Conductor Resistance (20 C)
1.91 Ohm/km
Discharge Capacity
1.0 nF/m
Jacket Color
RAL 2003 (Orange)
Jacket Material
PUR (adhesion-free, matte)
Max Wire Temp (fixed)
+90 C
Max Wire Temp (flexible)
+80 C
Min Bend Radius (fixed)
5 x D
Min Bend Radius (flexible)
7.5 x D
Operating Voltage (control)
300/300 V
Operating Voltage (power)
300/500 V
Power Wire Cross-section
10.0 mm^2

Frequently Asked Questions about RKL4594:

Q: What is the jacket color of the Bosch Rexroth Indramat RKL4594 cable?

A: The RKL4594 cable features a jacket color of RAL 2003, which is orange for high visibility.

Q: What is the highest wire temperature the RKL4594 cable can withstand in fixed applications?

A: The maximum operating temperature for fixed installation is +90 °C.

Q: What is the power wire cross-section size of the RKL4594 cable?

A: The power wire cross-section for the RKL4594 cable is 10.0 mm², suitable for carrying higher power loads.

Q: What is the minimum bend radius requirement for the RKL4594 cable when flexibly installed?

A: The minimum bend radius for flexible installation of the RKL4594 cable is 7.5 times the cable diameter.

Q: What material is used for the jacket of the RKL4594 power cable?

A: The RKL4594 cable's jacket is made from PUR, which is adhesion-free and has a matte finish.


Internal Product Review

  • ‘‘The RKL4594 is a robust motor power cable from the RKL series by Bosch Rexroth Indramat, featuring a durable PUR jacket in RAL 2003 orange and an assembly configuration of AEH/RKS+INK0605-RLS0721. With a cable construction of 4x10.0 + 2x1.0 + 2x1.5 mm² and a power wire cross-section of 10.0 mm², this cable reliably handles demanding power transmission. Its high maximum wire temperature and flexible construction make it ideal for industrial environments requiring both durability and performance.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo