RKL4567 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RKL4567 is part of the RKL Motor Power Cables series and features a cable construction of 4x10.0mm² plus shielded pairs. Its PUR jacket is orange, adhesion-free, matte, and the cable is rated for 5 million bending cycles. The cable has a rated voltage of 500 V and a conductor resistance of 1.91 Ohm per kilometer.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKL4567 power cable is produced by Bosch Rexroth Indramat within the RKL Motor Power Cables series. Designed for permanent connection between a drive and motor, it routes three-phase supply and auxiliary signals in automated machinery. The cable supports applications where dynamic motion and continuous flexing are present, ensuring reliable power delivery to servo motors in gantries, conveyors, and assembly robots.
The conductor set follows a cable construction of 4x10.0 mm²+(2x1.0 mm²)StC+(2x1.5 mm²)StC, so four 10 mm² cores carry the main phase current while shielded control pairs handle brake and temperature signals. Each power core adheres to a cross-section of 10.0 mm², allowing low voltage drop on axes that draw high continuous current. For insulation coordination the power group is rated to 500 V, fitting the output bus of IndraDrive converters. A moulded drive-side connector identified as INS0382 mates directly with the inverter, eliminating field crimping. External protection comes from a PUR (adhesion-free, matte) jacket that resists oil, abrasion, and welding sparks while the surface is supplied in RAL 2003 orange for easy traceability within crowded drag chains.
Mechanical service life is defined by a flex rating of 5 million bending cycles, so the cable can travel repeatedly in energy chains without conductor fatigue. Copper conductors exhibit a resistance of 1.91 Ohm/km, limiting I²R losses on long runs. When installed in moving carriers the designer must observe a minimum dynamic bend radius of 7.5xD, whereas fixed routing can follow 5xD without stressing the cores. The round profile measures 22.2 mm in diameter, allowing clamp selection and cabinet routing to be planned accurately.
Frequently Asked Questions about RKL4567:
Q: What is the bending cycle rating of the RKL4567 motor power cable?
A: The RKL4567 cable is rated for 5 million bending cycles, making it suitable for dynamic applications.
Q: What is the power wire cross-section of the RKL4567 power cable?
A: This cable features a power wire cross-section of 10.0 mm², providing substantial current-carrying capacity.
Q: What material is used for the outer jacket of the RKL4567 cable?
A: The RKL4567 utilizes a PUR (adhesion-free, matte) jacket for durability and chemical resistance.
Q: Which connector is provided on the drive side of the RKL4567 power cable?
A: The drive-side power connector on the RKL4567 is the INS0382 type.
Q: What is the rated voltage for power transmission on the RKL4567 cable?
A: This cable supports a rated voltage of 500 V on the power wires.
