RKL4565 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
The Bosch Rexroth Indramat RKL4565 is part of the RKL Motor Power Cables series and features a PUR orange jacket with a 22.2 mm outer diameter. This cable offers halogen-free construction, oil resistance, and supports an operating voltage of 600 VAC for both control and power. It includes power conductors with a 4 x 10.0 mm² cross-section and control wires with 2 x 1.0 mm² plus 2 x 1.5 mm² cross-sections.
Internal Product Review
The RKL4565 from Bosch Rexroth Indramat is a robust motor power cable featuring PUR jacket material for enhanced oil resistance and halogen-free safety. With a 4 x 10.0 mm² power conductor cross-section and a maximum wire temperature of 90°C, this cable is engineered for demanding industrial environments. The RKL4565 stands out for its combination of durability and high electrical performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKL4565 is a motor power cable from Bosch Rexroth Indramat, supplied within the RKL Motor Power Cables series. It links servo drives to synchronous motors and transfers both phase power and auxiliary control signals in automated machines, providing a pre-defined mechanical and electrical interface that simplifies field wiring.
This cable carries the motor’s three-phase load through four copper conductors sized at 4 x 10.0 mm², while two paired signal elements with a capacitance of 1.0 nF/m help maintain low common-mode noise between drive and encoder circuits. A conductor resistance of 1.91 ohm/km limits voltage drop over extended runs, so the drive can deliver rated current without oversizing. Its PUR sheath holds an outside diameter of 22.2 mm, giving adequate crush strength for drag-chain routing. Both the power and control cores are rated for an operating voltage of 600 VAC, so the cable can be installed on the same protective circuit as mainstream industrial drives without special derating.
The jacket is manufactured from PUR (adhesion-free, matte) in a high-visibility RAL 2003 (orange) colour, meeting plant requirements for quick identification of energized motor wiring. Internally, the feedback loop is accommodated by control pairs sized at 2 x 1.0 mm² + 2 x 1.5 mm², keeping signal impedance balanced across differential encoder lines. Continuous conductor operation is permitted up to 90 °C when the cable is fixed, a temperature margin that withstands cabinet hotspots near inverters. The compound is halogen-free to minimize toxic emissions during a fire and remains oil-resistant for use in machining centres where coolant spray is unavoidable; these chemical and environmental protections extend service life without additional conduit or sleeving.
