RKL4535 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
32 Seconds
The Bosch Rexroth Indramat RKL4535 is part of the RKL Motor Power Cables series and features an 11-pin bayonet lock connector type. The cable has an orange PUR jacket, supports 600 VAC voltage rating for both power and control wires, and has an outer diameter of 25.5 mm. It offers 3+PE power contacts and 4 control wires with a 1.5 mm² cross-section each.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKL4535 cable is part of the RKL Motor Power Cables series from Bosch Rexroth Indramat. It combines motor power conductors, a protective earth, and shielded control cores in one assembly, so a drive and a synchronous servo motor can be linked with a single cable run. This layout helps reduce routing complexity in automated production lines, including linear stages, gantry axes, and packaging equipment.
For stationary routing, the cable can be bent to 5 × D, while moving applications require a minimum bend radius of 7.5 × D. The cable has an outer diameter of 25.5 mm and a jacket in RAL 2003 (orange), which makes it easy to identify in cable ducts and machine frames. The jacket material is PUR, which helps resist abrasion and oil exposure in areas with repeated movement. The power conductors have a resistance of 1.21 Ω/km, which helps limit voltage drop over longer cable runs. Continuous conductor temperature can reach +90 °C in fixed routing, and the same temperature is permitted in flexing sections when the stated bend limits are observed.
At both the motor and cabinet ends, the cable uses an 11-pin bayonet lock connector for secure and vibration-resistant attachment. The control section uses conductors sized 4 × 1.5 mm², and these cores are intended for brake or sensor signals that are kept separate from the three-phase power set and protective earth. The control conductors carry a 600 VAC UL rating, supporting use in industrial machine wiring where auxiliary circuits need the same dependable insulation system as the main cable body. Line-to-shield capacitance is limited to 1.2 nF/m, which helps keep leakage current and EMC-related effects under control at typical PWM switching frequencies. This cable is suited for indoor machine tools and automated storage systems where combined power and control wiring is needed in one robust assembly.
Frequently Asked Questions about RKL4535:
Q: What connector type is used on the Bosch Rexroth RKL4535 cable?
A: The RKL4535 power cable features a 11-pin bayonet lock connector for secure attachment to compatible devices.
Q: What is the power wire cross-section of the RKL4535 cable?
A: This cable provides a power wire cross-section of 16.0 mm², supporting substantial current loads in industrial settings.
Q: What are the bending radius specifications for the RKL4535 cable?
A: The RKL4535 has a bending radius of 5 × D for fixed installations and 7.5 × D for flexible applications.
Q: What is the color and material of the RKL4535 cable jacket?
A: The cable jacket is made of PUR material in RAL 2003 orange, enabling high visibility in installations.
Q: What is the voltage rating of the power and control wires on the RKL4535 cable?
A: Power and control wires in the RKL4535 are rated for 600 VAC under UL standards, ensuring compliance with common industrial requirements.
