Product Description:

The RKL0201 motor power cable is produced by Bosch Rexroth Indramat within the RKL Motor Power Cables series. As a ready-made assembly, it connects servo drives to synchronous or asynchronous motors, supplying phase conductors and auxiliary control cores required for coordinated motion in automated lines. The cable integrates factory-terminated connectors so installers can route power and feedback signals without on-site crimping, reducing assembly time and wiring errors in industrial automation cells.

The cable’s flex-rated jacket is specified for 5,000,000 bending cycles, meaning it can move repeatedly in cable tracks before mechanical fatigue appears. During dynamic motion the minimum allowable loop is 7.5×D, so designers must maintain that radius to protect the conductors. Connector A is the keyed power plug RLS1201, while connector B is the mating straight plug RLS0201; this predefined pair ensures polarity is fixed at both machine and drive ends. Five dedicated control cores each with a cross-section of 0.75 mm² carry brake release or sensor signals parallel to the power conductors, limiting voltage drop on low-current circuits.

Bulk material for the assembly originates from the INK0650 cable family, giving an outer sheath that resists oils and weld splatter up to +80 °C and remains flexible down to -30 °C for cold-room conveyors. The three phase leads and protective earth are supplied as 3 + PE conductors with a 1.5 mm² cross-section, delivering motor currents while meeting safety grounding requirements. A static bending radius of 5×D applies when the cable is fixed in place, and the ready-made build shortens commissioning time because no field terminations or shield trimming are needed.