RKL0099 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
The Bosch Rexroth Indramat RKL0099 is a power cable from the RKL Motor Power Cables series. This ready-made cable features connectors RLS1101 and RLS0745, supports up to 5,000,000 bending cycles, and is rated for operation between -30°C and 80°C. It has a dynamic bending radius of 7.5 times the cable diameter and a static bending radius of 5 times the cable diameter.
Internal Product Review
The RKL0099 is a ready-made power cable from the RKL Motor Power Cables series, equipped with RLS1101 and RLS0745 connectors for dependable motor integration. This basic cable variant is designed for high flexibility, rated for up to 5,000,000 bending cycles and a dynamic bending radius of 7.5xD. The robust construction ensures reliable operation across a wide temperature range, making it suitable for demanding industrial environments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKL0099 is a flexible power lead supplied by Bosch Rexroth Indramat within the RKL Motor Power Cables series. The ready-terminated motor power cable transfers three-phase drive output from an Indramat servo drive to a compatible rotary or linear actuator. Its factory-installed connectors reduce onsite wiring, while the flexible jacket supports dynamic routing in automated machinery such as gantries, pick-and-place axes, and packaging lines. These features allow the cable to carry motor power through moving equipment without requiring separate connector assembly during installation.
The cable is rated for 5,000,000 bending cycles, allowing it to operate in moving cable carriers for an extended period before conductor fatigue becomes critical. During motion, the cable requires a minimum dynamic bending radius of 7.5 × D, where D is the cable’s outer diameter. Maintaining this radius helps prevent excessive stress on the internal strands and insulation layers during repeated acceleration and directional changes. The cable remains flexible at temperatures as low as -30 °C and resists thermal aging at temperatures up to 80 °C while energized. Its ready-made construction includes overmolded plugs and predetermined conductor phasing, eliminating the need for onsite crimping or pin assignment.
For fixed routing, the cable requires a minimum static bending radius of 5 × D to avoid compressing the insulation or placing unnecessary strain on the conductors. An angled RLS1101 drive-end plug provides a keyed power interface that supports secure orientation and helps route the cable within confined equipment spaces. The motor end uses an RLS0745 connector for direct attachment to compatible Rexroth compact synchronous motors. The cable has a Basic design with standard jacket material and conductor sizing for general-purpose motor power transmission inside control cabinets or along energy chains. Its jacket remains suitable for installations that combine stationary sections with repeated movement, provided the appropriate bending radius is maintained for each routing condition.
