RKL0061 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
0 Seconds
The Bosch Rexroth Indramat RKL0061 is part of the RKL Motor Power Cables series and features power conductors of 3 plus PE at 6.0 mm², as well as auxiliary conductors measuring 2 x 1.5 mm². The cable has a PUR jacket, a diameter of 18.5 mm, and a bending radius of 5 times the diameter when fixed or 7.5 times when flexible.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKL0061 is a motor power cable from Bosch Rexroth Indramat’s RKL Motor Power Cables series, supplied to link IndraDrive or Diax servo amplifiers with matched motors in automated machinery. Its multi-core layout carries three-phase power, protective earth, control, and auxiliary signals in a single sheath, providing a compact wiring route inside drag chains and fixed-installation conduits.
An overall diameter of 18.5 mm balances current capacity with routing space, while the composite core build of [4x6.0 mm²+(2x1.0)StC+(2x1.5)StC] separates power, control, and brake circuits to minimise crosstalk. Copper resistance is limited to 3.30 Ohm/km at 20 °C, so voltage drop stays low on long runs. The cable shows a discharge capacitance of 0.8 nF/m, reducing common-mode noise that can trip drive monitoring. A tough PUR (adhesion-free, matte) outer jacket resists oil and coolant and allows easy bundle separation during service.
For cabinet wiring the minimum static bend is 5 x D, and in continuously moving energy chains it tolerates a dynamic radius of 7.5 x D, supporting tens of millions of cycles without conductor fatigue. The core insulation endures up to +90 °C when clamped, yet remains flexible down to +80 °C in motion, ensuring thermal stability near servo motors. Three power conductors plus PE each carry 6 mm², while two 1.0 mm² control conductors and two 1.5 mm² auxiliary conductors provide brake and sensor supply, so a separate feedback cable is not burdened by auxiliary loads.
Wake Industrial stocks this cable, offers same-day shipping on qualifying orders, and quotations remain valid for 30 days to streamline maintenance planning.
Frequently Asked Questions about RKL0061:
Q: What material is used for the cable jacket on the RKL0061 power cable?
A: The RKL0061 uses a PUR jacket that is adhesion-free with a matte finish.
Q: How many auxiliary conductors are present in the RKL0061 cable?
A: This model includes two auxiliary conductors with a cross-section of 1.5 mm² each.
Q: What is the minimum bending radius for the RKL0061 when installed in a fixed position?
A: When fixed, the RKL0061 cable has a minimum bending radius of 5 times its diameter.
Q: What is the configuration and size of the power conductors in the RKL0061 cable?
A: The cable features three power conductors plus PE, each with a cross-sectional area of 6.0 mm².
Q: What is the conductor resistance of the RKL0061 cable at 20°C?
A: The RKL0061 power cable has a conductor resistance of 3.30 Ohm per kilometer at 20°C.
