RKL0046 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The Bosch Rexroth Indramat RKL0046 is part of the RKL Motor Power Cables series and features a PUR jacket with an outer diameter of 14.8 mm. It supports bending cycles up to 5,000,000, has an operating voltage of 300/500 V for power, and compatibility with drag-chain applications. This cable includes a power wire cross-section of 2.5 mm² and a control wire cross-section of 1.0 mm².
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKL0046 cable assembly is produced by Bosch Rexroth Indramat within the RKL Motor Power Cables series. It serves as the primary power link between an Indramat drive controller and its matched motor, supporting synchronous motor operation in automated handling, packaging, and machining cells. The factory-terminated design removes on-site crimping work; one end carries the RLS1108/C03 motor connector while the opposite end is fitted with an RLS0746/K02 controller plug. By integrating both power and low-level control cores inside a single PUR-sheathed jacket, the product simplifies routing and ensures consistent signal referencing in dynamic drag-chain environments.
Mechanical durability is the dominant performance metric of the RKL0046. The cable is specified for 5,000,000 flex cycles, meeting continuous-duty requirements in energy chains. When clamped, a fixed installation must respect a minimum bend of 5xD, whereas moving layouts use a tighter guide radius of 7.5xD to limit conductor fatigue. The outer diameter measures 14.8 mm, giving installers a clear reference for chain cavity selection and gland sizing. A polyurethane sheath rated PUR offers abrasion resistance, coolant tolerance, and halogen-free behaviour. Combined with the INK0602 bulk construction and approval for drag-chain use, these characteristics maintain insulation integrity under repetitive acceleration.
Electrical capability centres on conductor geometry and rated voltages. The three power cores each have a cross-section of 2.5 mm², while the pair of control leads are dimensioned at 1.0 mm² to carry brake release or sensor reference currents. These cores are designed for a continuous line-to-line rating of 300/500 V for the power group and 300/300 V for the auxiliary circuits, aligning with typical Rexroth servo inverter outputs. Mated through the factory-installed RLS0746/K02 and RLS1108/C03 connectors, the assembly enables plug-and-play replacement in the field and avoids wiring errors that arise with loose cable kits.
Frequently Asked Questions about RKL0046:
Q: What is the maximum number of bending cycles the RKL0046 cable can withstand?
A: The RKL0046 cable supports up to 5,000,000 bending cycles, allowing for long service life in dynamic applications.
Q: What is the minimum bending radius for fixed installation of the RKL0046 cable?
A: The bending radius for fixed installation is 5 times the cable's diameter, measured at 5xD.
Q: What material is used for the outer jacket of the RKL0046 motor power cable?
A: This cable uses a PUR jacket material to provide enhanced resistance to wear, oils, and chemicals.
Q: What controller connector is equipped on the RKL0046 power cable?
A: The RKL0046 cable includes a controller connector type RLS0746/K02 for secure and reliable data connection.
Q: What is the power wire cross-section of the RKL0046 cable model?
A: The power wires in the RKL0046 have a cross-section of 2.5 mm² for effective current transmission.
