RKL0032 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RKL0032 is a ready-made power cable from the RKL Motor Power Cables series with a cable diameter of 18.5 mm and a jacket made from PUR. It offers a dynamic bending radius of 7.5 times the diameter and is suitable for drag chains, supporting up to 5 million bending cycles.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKL0032 motor power cable is a ready-made assembly produced by Bosch Rexroth Indramat within the RKL Motor Power Cables series. As a pre-terminated link between an IndraDrive controller and a synchronous motor, it delivers the three-phase supply conductors together with auxiliary sensor lines in a single robust sheath. In automated plants this component streamlines installation time, maintains electromagnetic compatibility, and ensures that drive output reaches the motor without excessive voltage drop or unwanted coupling.
The cable diameter measures 18.5 mm, giving enough cross-section to carry drive currents while remaining flexible for routing through machine frames. Internal copper conductors exhibit a resistance of 3.30 ohm/km, a value that limits I²R losses over typical servo-loop distances. A wear-resistant PUR outer jacket protects the bundle against cutting fluids, oil, and weld spatter often encountered on production floors. During dynamic motion the assembly can bend down to a radius of 7.5×D without exceeding mechanical stress limits, and tests certify endurance for 5 million flex cycles, supporting high-duty linear transfer systems and gantry axes.
Two coded connectors shorten commissioning: the drive end carries the RLS0747 plug, while the motor end is fitted with an RLK1301 receptacle, both keyed to avoid wiring mistakes. Because the cable is drag chain suitable, it can be laid in energy-guide carriers that subject it to constant acceleration without jacket cracking. When routed in a fixed installation it only needs a minimum curve of 5×D so cabinet interiors can stay compact. These mechanical allowances combine with the conductor makeup of 4×6.0 mm² power cores plus auxiliary pairs to match the current and feedback requirements of the company’s servo platforms.
Frequently Asked Questions about RKL0032:
Q: What is the bending cycle rating of the RKL0032 power cable?
A: The RKL0032 cable is suitable for up to 5 million bending cycles.
Q: What material is used for the jacket of the RKL0032 cable from Bosch Rexroth?
A: The cable features a PUR outer jacket for enhanced durability and resistance to environmental factors.
Q: Is the RKL0032 suitable for drag chain installations in automated systems?
A: Yes, the RKL0032 cable is designed for use in drag chain applications.
Q: What conductor configuration does the RKL0032 cable offer for connections?
A: The conductor makeup is 4x6.0 + 2x1.0 + 2x1.5 mm², allowing for power and auxiliary connections.
Q: What connectors are provided with the RKL0032 cable on the drive and motor ends?
A: The RKL0032 uses the RLS0747 connector on the drive side and the RLK1301 connector on the motor side.
