RKL0030 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RKL0030 is a power cable from the RKL Motor Power Cables series with a PUR jacket and an overall diameter of 14.8 mm. It allows a maximum acceleration of 10 meters per second squared and supports a maximum travel velocity of 5 meters per second. The cable is designed for drag chain applications, features a ground terminal connection of M8, and has an operating voltage of 300/500 V for power.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKL0030 cable is manufactured by Bosch Rexroth Indramat and belongs to the RKL Motor Power Cables series. It is supplied as a combined power and auxiliary control lead for servo and spindle motors used in automated machinery. The design supports continuous flexing inside drag chains, allowing moving equipment to maintain a consistent electrical connection between the drive controller and the motor. Its combined arrangement reduces the need to route separate power and control cables through the same carrier.
The copper conductors have a resistance of 7.98 Ω/km while remaining flexible enough for tight drag-chain radii. The power cores are rated for an operating voltage of 300/500 V, and the PUR jacket withstands oils and coolants commonly present in machine tools. Dynamic motion is supported at travel speeds up to 5 m/s and accelerations up to 10 m/s², allowing the cable to be routed through fast pick-and-place axes without premature fatigue. The cable has a capacitance to ground of 0.7 nF/m, which should be considered when selecting output filters for the associated inverter. The cable is suitable for drag chains, and its integrated protective conductor terminates at an M8 ground eyelet for direct bonding to a motor housing.
The control pairs inside the sheath are rated for 300/300 V and can carry brake-release signals or sensor power without requiring a separate harness. Installation along linear gantries is permitted for up to 50 m of horizontal travel, supporting long strokes on palletizers or portal robots. The cable has an overall diameter of 14.8 mm, allowing it to fit standard chain cross sections while leaving space for cooling hoses or feedback lines. Its mass per unit length is 0.380 kg/m, which can be included when calculating moving mass and selecting a drive system. A molded PUR outer layer resists abrasion, and the cable remains flexible during repeated bending cycles.
