RKL0027 Bosch Rexroth Indramat

Ask for Availability

Preparing your secure checkout page...

The Bosch Rexroth Indramat RKL0027 is a power cable from the RKL Motor Power Cables series. It features a PUR orange jacket, a diameter of 18.5 mm, and supports up to 5,000,000 bending cycles. The cable can operate at temperatures up to 40°C with a maximum wire temperature of 80°C and provides total shielding with power conductors sized at 4x6.0 mm².

Warranty
Wake Industrial Warranty

Quote Request Form:

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The RKL0027 motor power cable is manufactured by Bosch Rexroth Indramat as part of the RKL Motor Power Cables series. Designed for servo-axis installations, this cable carries the three-phase supply, protective earth, and auxiliary control cores between a drive controller and a moving motor. Its application space is automated machinery that uses drag chains or robotic joints, where sustained flexing and electrical noise immunity are both mandatory.

The outer diameter is 18.5 mm, a size that balances current-carrying capacity with routing through standard cable trays. Four power conductors with a cross-section of 4x6.0 mm² handle typical servo currents while limiting voltage drop over long runs. Independent auxiliary pairs, sized at 2x1.0 mm² + 2x1.5 mm², are reserved for brake release or temperature sensor lines and keep these low-level functions separate from the main phases. A Total Shield surrounds all cores, providing continuous 360° coverage that attenuates drive-generated electromagnetic interference and protects feedback signals travelling nearby. Mechanically, the construction is verified for 5,000,000 bending cycles, so the cable can operate in high-duty energy chains without early conductor fatigue.

Environmental resilience is provided by a PUR outer jacket that is matt, low-adhesion, and resistant to industrial oils. Conductor insulation can reach a continuous temperature of +80 °C without degradation, allowing higher motor winding temperatures before derating becomes necessary. When installed statically, the cable tolerates ambient temperatures down to -30 °C, and dynamic layouts observe a minimum bend radius of 7.5 × D to preserve shielding integrity. The jacket is colored RAL 2003 orange for clear identification in control cabinets and on moving axes, aiding maintenance personnel in tracing power paths during commissioning or service.

Bending Cycles
5,000,000
Cable Diameter (d)
18.5 mm (±1.0)
Control Wire Size
2x1.0 mm² + 2x1.5 mm²
Jacket Color
RAL 2003 (Orange)
Jacket Material
PUR (Matt, Low-Adhesion)
Max Operating Temp
+40 C
Max Wire Temperature
+80 C
Min Bend Radius (fixed)
5 x D
Min Bend Radius (flexible)
7.5 x D
Min Operating Temp (fixed)
-30 C
Min Operating Temp (flexible)
-20 C
Power Conductor Size
4x6.0 mm²
Shield Type
Total Shield

Frequently Asked Questions about RKL0027:

Q: What is the bending cycle rating of the Bosch Rexroth Indramat RKL0027 cable?

A: The RKL0027 cable can withstand up to 5,000,000 bending cycles for high-flex applications.

Q: What type of jacket material is used on the RKL0027 motor power cable?

A: The RKL0027 cable uses a PUR jacket that is matt and low-adhesion, providing resistance to wear and contaminants.

Q: What is the cable diameter of the Bosch Rexroth Indramat RKL0027?

A: The diameter of the RKL0027 cable is 18.5 mm with a tolerance of plus or minus 1.0 mm.

Q: What type of shielding is provided in the RKL0027 cable from Bosch Rexroth Indramat?

A: The RKL0027 cable features a total shield design for improved protection against electrical interference.

Q: What are the control wire sizes in the Bosch Rexroth Indramat RKL0027 cable?

A: The control wire size for the RKL0027 is 2x1.0 mm² and 2x1.5 mm², accommodating control signal requirements.


Internal Product Review

  • ‘‘The RKL0027 is a Bosch Rexroth Indramat motor power cable designed for demanding motion applications, featuring a durable PUR jacket with low adhesion and a total shield for electromagnetic protection. With a rated bending cycle of 5,000,000 and a maximum operating temperature of +40°C, this cable delivers excellent flexibility and reliability in dynamic environments. Its robust construction ensures consistent performance in high-cycle industrial settings.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo