RKL0014 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The Bosch Rexroth Indramat RKL0014 is a ready-made power cable from the RKL Motor Power Cables series. It features total shielding, a PUR outer jacket, and a dynamic bend radius of 7.5 times the cable diameter. The cable supports up to 5,000,000 bending cycles and has an orange jacket color (RAL 2003).
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKL0014 cable is a factory-manufactured motor power cable produced by Bosch Rexroth Indramat within the RKL Motor Power Cables series. It is supplied to connect a drive controller to a servo motor inside automated machinery, carrying the phase and protective-earth conductors while withstanding the fast motion cycles typical of handling systems and gantry axes. Because the assembly is delivered fully tested, panel builders can install it without field crimping or additional shielding work.
The RKL0014 is defined as a ready-made cable, meaning both ends are pre-terminated and service ready. Its polyurethane outer jacket protects the conductors and fixes an outer diameter of 12.0 mm, a size that fits standard energy-chain clamps. The jacket is colored Orange (RAL 2003) for quick identification of power wiring in mixed cable trays. When installed statically, the cable can be curved with a minimum radius of 5xD, whereas moving machine elements must respect a dynamic radius of 7.5xD; observing these limits preserves insulation integrity across the specified 5,000,000 bending cycles. The PUR sheath also resists oils and coolants, so no extra conduit is needed.
Signal integrity is supported by a Total Shield that surrounds all cores and drains high-frequency interference to ground. On the drive side, the harness carries a keyed RLS0745/K01 connector, while the motor end terminates in an angled RLS1101/C02 plug; these coordinated interfaces eliminate wiring errors during maintenance. Copper conductors remain serviceable up to 90 °C in fixed installation, allowing the cable to share enclosures with warm braking resistors without accelerated aging. The specification set above ensures continual power delivery under acceleration profiles that would fatigue unshielded or field-assembled leads.
Frequently Asked Questions about RKL0014:
Q: How many bending cycles can the RKL0014 motor power cable endure?
A: The RKL0014 cable is designed to withstand up to 5,000,000 bending cycles in dynamic applications.
Q: Does the RKL0014 cable offer shielding against electrical noise?
A: The RKL0014 features total shielding along its entire length, providing effective protection against electrical interference.
Q: What type of connector is provided on the motor side of the RKL0014 cable?
A: This cable uses a RLS1101/C02 connector for the motor end, ensuring secure power delivery to the motor.
Q: What is the outer jacket material used for the RKL0014 cable?
A: The outer jacket of the RKL0014 is made from PUR, giving it good resistance to abrasion and chemicals.
Q: What color is the outer jacket of the RKL0014 cable and what is its color code?
A: The jacket of the RKL0014 power cable is orange and matches color code RAL 2003 for easy identification.
