RKH0700 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
43 Seconds
The Bosch Rexroth Indramat RKH0700 is a hybrid cable from the RKH Hybrid Cables series, designed as a ready-made basic model with plug connectors RHS0007 on both ends. It supports dynamic bending radii of 10 times the cable diameter and static bending radii of 5 times the diameter, allowing up to 5 million bending cycles. The operating temperature ranges from -40 to 80 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKH0700 hybrid power-and-signal cable is supplied by Bosch Rexroth Indramat under the RKH Hybrid Cables series. As a pre-assembled flexible link, it distributes servo drive power, feedback, and auxiliary control lines through a single jacket, streamlining cabinet-to-motor wiring in automated machinery. The cable is intended for dynamic drag-chain installations where coordinated motion axes demand compact routing and minimal installation time.
The RKH0700 is rated for 5,000,000 bending cycles, so it can occupy high-duty energy chains without premature conductor fatigue. During movement the outer sheath must never be bent tighter than a 10×D radius; this maintains conductor geometry and preserves impedance integrity. When routed statically, the permissible bend reduces to 5×D, enabling tighter cabinet runs once the installation is fixed. Both ends terminate with a single Plug Connector RHS0007, giving keyed power and encoder contacts that mate directly with IndraDrive and MSK motor sockets. Because the assembly is delivered as a Ready-Made harness, users avoid ferrule crimping, shielding preparation, and high-pot testing at their own facility.
In service the RKH0700 carries both power cores and digital feedback pairs inside one jacket, identifying it as a Hybrid Cable. The manufacturing “Basic” model code supports indoor or protected-machine spaces where oil splash and weld spatter are not expected. Temperature limits span from -40 °C during storage or cold-start operation up to 80 °C at continuous conductor load, allowing the same cable to survive unheated warehouses and warm motor housings without derating. Identical RHS0007 plugs on both ends simplify spare-part inventories, and the matched pinout maintains signal integrity when the cable is reversed in the chain path. With these mechanical and environmental margins, the RKH0700 supports long drag-chain service life while preserving consistent servo feedback and power delivery.
Frequently Asked Questions about RKH0700:
Q: How many bending cycles can the RKH0700 hybrid cable withstand?
A: The RKH0700 hybrid cable is designed for 5,000,000 bending cycles.
Q: What type of connectors are used on the RKH0700 hybrid cable?
A: The RKH0700 is equipped with RHS0007 Plug Connector on both ends.
Q: What is the minimum dynamic bending radius for the RKH0700 cable?
A: The minimum dynamic bending radius for this cable is 10×D, where D is the cable diameter.
Q: What is the operating temperature range of the RKH0700 hybrid cable?
A: The RKH0700 can operate in temperatures ranging from -40 °C to 80 °C.
Q: What type and model is the RKH0700 cable from Bosch Rexroth Indramat?
A: This is a basic model ready-made hybrid cable from Bosch Rexroth Indramat's RKH series.
