Product Description:

The RKH0341 hybrid cable is supplied by Bosch Rexroth Indramat within the RKH Hybrid Cables series. It is a ready-made assembly that merges motor power, feedback, and auxiliary service lines so a single run can link a drive controller to a moving axis. This consolidation reduces cabinet exit points and minimizes installation time in automated production equipment, material-handling gantries, and packaging machinery. By grouping these circuits in one outer jacket, the assembly also helps keep cable carriers less crowded along moving machine sections. The cable is intended for applications that require dynamic articulation and low maintenance in energy-chain layouts.

Its mechanical life is rated for 5,000,000 flexing cycles, allowing continuous motion in cable carriers without premature jacket fatigue. During movement, conductors must not be bent tighter than a dynamic radius of 10×D; when parked, the minimum static loop can be reduced to 5×D. The cable stays functional from -40 °C up to +80 °C, covering typical freezer environments through high-temperature machine spaces. Classified as a Basic build, the assembly uses a ready-made termination process, so lengths leave the factory cut and stripped for immediate installation. These attributes suit multi-shift production lines that cannot tolerate downtime caused by onsite connector work or unexpected sheath cracking.

The motor end carries an RHS0015 molded connector. The drive side is finished with an RHS0024 plug, which helps avoid field crimping errors. Conductor layout and shielding follow the REH0800 raw cable construction used for hybrid energy and encoder lines. The assembly is identified as a Hybrid variant, combining DC bus cores with twisted signal pairs in one outer jacket. Keeping power and signal paths in one cable can simplify routing between the cabinet and the moving axis while reducing the number of separate runs that must be managed.