RKH0211 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
17 Seconds
The Bosch Rexroth Indramat RKH0211 is a ready-made hybrid cable in the RKH Hybrid Cables series, designed with RHS0011 connectors on both ends. It supports up to 5,000,000 bending cycles and performs in temperatures ranging from -40°C to 80°C. The cable features a dynamic bending radius of 10 times the cable diameter and a static bending radius of 5 times the diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKH0211 is a flexible power-and-signal lead produced by Bosch Rexroth Indramat for the RKH Hybrid Cables series. Intended for servo-axis wiring, the cable consolidates motor power conductors and encoder feedback pairs so machine builders can route one bundle instead of several. This reduces panel space, shortens installation time, and assures impedance matching between the drive controller and moving load in dynamic industrial automation settings.
The cable is supplied as a Ready-Made assembly, meaning factory-terminated plugs eliminate field crimping and ensure consistent shielding. Its jacket and conductor construction withstand up to 5,000,000 cycles of continuous motion, a figure relevant for gantries or robots that run around the clock. During travel the cores may flex to a minimum dynamic radius of 10xD, helping prevent copper fatigue in tight energy chains. Service is approved from -40 °C for cold-store start-ups through to 80 °C in heated enclosures without degradation of insulation materials.
This model is classified as a Hybrid Cable, so it carries both three-phase power and digital feedback lines under a common overall braid. Each end terminates in a keyed RHS0011 circular connector, which locks with quarter-turn bayonets for quick change-out. For static runs—such as inside the control cabinet—the jacket can be bent to a minimum radius of 5xD without stressing the cores. The cable follows the series’ Basic design level, indicating a standard outer sheath thickness and EMC screen that meet typical machine-tool noise limits.
Wake Industrial offers same-day shipping on this cable for qualified orders, supplies a 1-year warranty, and maintains a free chat tool where users can ask about type codes or general specifications.
Frequently Asked Questions about RKH0211:
Q: What is the assembly type of the RKH0211 cable from Bosch Rexroth Indramat?
A: The RKH0211 is a ready-made hybrid cable for immediate installation without custom assembly.
Q: How many bending cycles can the RKH0211 hybrid cable withstand?
A: This cable is rated for 5,000,000 bending cycles, supporting extended operation in dynamic environments.
Q: What is the dynamic bending radius of the RKH0211 cable variant?
A: A dynamic bending radius of 10 times the cable diameter is specified for this model.
Q: Which connector types are used on the RKH0211 hybrid cable from Bosch Rexroth Indramat?
A: The RKH0211 cable features RHS0011 connectors on both ends for secure and standardized connections.
Q: What is the operating temperature range for the RKH0211 hybrid cable?
A: This cable can operate in temperatures as low as -40 °C and up to a maximum of 80 °C.
