RKH0121 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
51 Seconds
The Bosch Rexroth Indramat RKH0121 is a hybrid cable from the RKH Hybrid Cables series and has a bending cycle rating of 5,000,000. This ready-made cable features RHS0021 connectors at both ends and can operate in temperatures ranging from -40 to +80 degrees Celsius. Its dynamic bending radius is 8 times the cable diameter, while its static bending radius is 4 times the diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKH0121 hybrid cable is produced by Bosch Rexroth Indramat within the RKH Hybrid Cables series. Intended for motion axes that flex continuously, this assembly carries motor power, encoder feedback, and auxiliary conductors in a single jacket to minimize drag-chain clutter. It is fully terminated for direct connection between drive and motor modules without on-site crimping or pin assignment, reducing wiring errors in automated packaging lines, gantries, and other industrial equipment.
The cable has a flex life of 5,000,000 bending cycles, allowing deployment in high-duty energy chains. During motion, the conductors may bend to a dynamic radius of 8 × D without exceeding copper strain limits, while stationary routing may follow a tighter static radius of 4 × D because no cyclic fatigue is induced. Both ends are equipped with a shielded RHS0021 circular connector, eliminating field soldering and preserving signal integrity across the combined power and feedback pairs. The connectors also provide consistent termination for the conductors within the shared jacket. The polyurethane jacket remains pliable from -40 to +80 °C, supporting operation in freezer environments or near heated machinery.
This assembly belongs to the Basic cable model group and is supplied as a ready-made cable in the RKH portfolio, meaning all terminations, strain reliefs, and pin assignments follow factory standards. Its hybrid design merges the REH-type feedback cores with power conductors around a shared drain wire. Inside the outer sheath, the signal bundle is identified as REH0803, which matches the impedance and shielding requirements of Bosch Rexroth SERCOS encoder channels. The shared drain wire supports effective shield continuity between the connectors, while the separate conductor groups maintain their respective power and signal functions. This arrangement allows the cable to carry several electrical functions through one routed assembly without requiring separate jackets in the energy chain.
