RKH0111 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
The Bosch Rexroth Indramat RKH0111 is a ready-made hybrid cable from the RKH Hybrid Cables series. It features plug connectors RHS0011 on both ends, supports up to 5,000,000 bending cycles, and operates within a temperature range of -40°C to 80°C. The cable has a dynamic bending radius of 10 times the cable diameter and a static bending radius of 5 times the diameter.
Internal Product Review
The RKH0111 is a robust hybrid cable from Bosch Rexroth Indramat, designed for high-flex applications with up to 5,000,000 bending cycles. Featuring plug connectors RHS0011 on both ends and a dynamic bending radius of 10xD, this ready-made cable is ideal for demanding motion tasks. Consistent performance is maintained across a wide temperature range from -40°C to 80°C, making it highly reliable in industrial environments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKH0111 is a hybrid cable manufactured by Bosch Rexroth Indramat and supplied within the RKH Hybrid Cables series. The cable combines power conductors with signal pairs in a single jacket, allowing servo drives and motor-mounted sensors to be linked through one line instead of separate cable runs. With its molded overmold and matched connectors, the product is intended for cable chains and moving axes where space savings, quick installation, and predictable flex life are important in industrial automation assemblies.
The cable carries the variant code Hybrid Cable, indicating that high-current cores and communication elements share the same outer sheath while retaining internal shielding. The assembly is delivered as a Ready-Made harness, so it arrives cut to length and fully terminated. Each end carries a keyed Plug Connector RHS0011 that aligns with standard IndraDrive ports and locks with a quarter turn, removing the need for field crimping. Flex performance permits a minimum dynamic bending radius of 10 × D, meaning the moving radius must be at least ten times the cable’s outer diameter. The cable can withstand up to 5,000,000 bending cycles in an energy chain without premature conductor fatigue, making it suitable for routes exposed to frequent repetitive movement.
During static installation, the minimum bending radius is 5 × D, allowing compact routing inside control cabinets after the cable is secured. The operating temperature range extends from -40 °C under cold-start conditions to 80 °C near warm servo equipment, while the insulation remains stable throughout the stated range. The internal layout follows the Basic model, which uses a PVC outer jacket, tin-plated copper strands, and a braided drain to support consistent electromagnetic compatibility. Both ends are mirror-wired so signal continuity is maintained if the cable orientation is reversed. Molded strain-relief elements behind the connector hoods help prevent conductor movement and jacket creep when the assembly is exposed to axial pulling forces.
