RKG0062 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
Current response time:
3 Minutes
24 Seconds
The Bosch Rexroth Indramat RKG0062 is a ready-made encoder cable in the RKG Encoder Cables series. It features RGS1781 and RGS0010 connectors and is designed for 5,000,000 bending cycles. The cable supports a maximum operating temperature of 80 °C and has a dynamic bending radius of 7.5 times the cable diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKG0062 is an encoder cable produced by Bosch Rexroth Indramat for the RKG Encoder Cables series. It links motor-mounted encoders to the corresponding drive controllers, allowing closed-loop positioning in industrial automation systems. By integrating pre-terminated plugs and a jacket sized for drag-chain travel, this cable streamlines electrical installation on machine tools, palletizers, and pick-and-place axes where continuous motion and electromagnetic cleanliness are required.
The Basic model designation identifies a standard jacket and conductor set suitable for general routing inside an energy chain. A Ready-Made build means all terminations are factory-crimped and tested, so field wiring errors are eliminated. Functionally, the assembly is an Encoder Cable, so its twisted pairs are impedance-matched for differential feedback signals. Drive-side connection is handled by a keyed RGS1781 circular connector, while the motor end uses a compact RGS0010 plug; both housings include strain relief to shield conductors from tension. During constant motion the sheath may flex down to a dynamic radius of 7.5xD, preventing conductor fatigue while still fitting typical cable-carrier dimensions.
Mechanical life is rated for 5,000,000 bending cycles, giving the RKG0062 a long service interval even on high-duty gantry axes. When the cable is at rest, the static radius can tighten to 5xD without kinking the copper cores. Thermal limits permit operation and storage from -40 °C to 80 °C; insulation remains pliable at the minimum, and conductor resistance stays stable at the maximum. These bending and temperature capabilities, combined with the Basic construction, make the RKG0062 a dependable link between Bosch Rexroth Indramat drives and encoders in dynamic automation cells.
Frequently Asked Questions about RKG0062:
Q: How many bending cycles is the RKG0062 encoder cable rated for?
A: The RKG0062 encoder cable is rated for 5,000,000 bending cycles, supporting use in applications with frequent dynamic movement.
Q: What is the minimum operating temperature of the RKG0062 encoder cable?
A: This cable can operate in temperatures as low as -40 °C, making it suitable for cold environments.
Q: Which connector types are featured on the RKG0062 encoder cable?
A: The RKG0062 uses an RGS1781 connector on one end and an RGS0010 connector on the other, ensuring compatibility with matching encoder systems.
Q: What is the dynamic bending radius of the RKG0062 encoder cable?
A: A dynamic bending radius of 7.5xD is supported by this model, allowing flexibility for cable routing in moving applications.
Q: What type and variant of cable is the RKG0062 from Bosch Rexroth Indramat?
A: The RKG0062 is a ready-made basic encoder cable variant designed by Bosch Rexroth Indramat.
