RKG0051 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
25 Seconds
The Bosch Rexroth Indramat RKG0051 is part of the RKG Encoder Cables series and is constructed with a bulk cable type REG0011. This cable has a PUR jacket in RAL 2003 orange, features an outer diameter of 10.0 mm, and can operate in temperatures from -40 to +80 degrees Celsius. The RKG0051 supports up to 5,000,000 bending cycles with a dynamic bending radius of 7.5 times the diameter and a static bending radius of 4 times
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKG0051 belongs to the RKG Encoder Cables series produced by Bosch Rexroth Indramat. It is supplied as a ready-made feedback lead that links motor-mounted encoders to drive controllers, carrying position signals while tolerating continuous motion inside cable chains and robotic joints within industrial automation cells.
The cable’s signal and power pairs are arranged as 4x0.5 mm² + 5x(2x0.14 mm²)StC, a construction that separates higher-current conductors from twisted signal pairs to control crosstalk. An overall 10.0 mm outer diameter fits standard energy-chain dividers, and the polyurethane sheath supports up to 5,000,000 flex cycles under laboratory testing. During motion, the conductors may bend down to a radius of 7.5 × D, while fixed runs may be installed at a tighter 4 × D arc without copper fatigue. These limits define routing guidelines in dynamic gantry axes and static cabinet passages to preserve conductor insulation integrity.
The raw cable material is identified as REG0011, finished in a highly visible RAL 2003 (orange) outer jacket made from resilient PUR to resist oils and weld spatter. Service temperatures range from −40 °C up to +80 °C, allowing deployment in refrigerated packaging lines or high-ambient machine halls. At one end the assembly terminates in an RGS0003 circular connector, while the opposite side uses an RGS0004 mating plug so that both motor and controller interfaces are addressed without field crimping. These molded connectors relieve strain on the copper cores, seal against dust ingress, and preserve the transmission characteristics defined by the cable’s balanced pairs.
Frequently Asked Questions about RKG0051:
Q: How many bending cycles is the RKG0051 cable rated for during operation?
A: The RKG0051 encoder cable is specified for 5,000,000 bending cycles, enabling use in dynamic applications.
Q: What type of jacket material does the Bosch Rexroth RKG0051 encoder cable use?
A: This cable uses a PUR jacket material, providing enhanced resistance to abrasion and chemicals.
Q: What is the cable construction of the Bosch Rexroth Indramat RKG0051?
A: The RKG0051 is constructed with a 4x0.5 mm² plus 5x(2x0.14 mm²)StC cable configuration.
Q: What connector types are included on each end of the RKG0051 encoder cable?
A: Connector 1 on this cable is an RGS0003 type, while connector 2 is an RGS0004 type.
Q: What is the maximum operating temperature for the RKG0051 encoder cable?
A: The maximum operating temperature supported by the RKG0051 is +80°C.
