RKG0029 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
4 Seconds
The Bosch Rexroth Indramat RKG0029 is part of the RKG Encoder Cables series and features a PUR jacket in RAL 2003 orange with an outer diameter of 8.8 mm. It is built with a cable construction of 4x2x0.25 mm² plus 2x0.5 mm² and supports up to 5,000,000 bending cycles for use with drag chains. The encoder cable is halogen-free and offers a dynamic bending radius of 7.5 times the cable diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKG0029 encoder cable is supplied by Bosch Rexroth Indramat as part of the RKG Encoder Cables series. It links position feedback devices to drive controllers in industrial automation, carrying differential encoder signals while remaining flexible enough for moving machine axes. The cable is pre-terminated and ready for plug-and-play installation between the encoder and the controller cabinet.
This model is rated for 5,000,000 bending cycles, a figure that defines its fatigue life when repeatedly flexed in cable carriers. During motion the minimum bend radius is 7.5xD, so the cable should not be curved tighter than 7.5 times its diameter, while static routing can follow the smaller 5xD radius without stressing the conductors. An outer sheath of PUR provides abrasion resistance and oil tolerance, and the assembly is manufactured from raw cable INK0448 to match Bosch Rexroth signal impedance requirements. Overall diameter reaches 8.8 mm, allowing installation through standard gland sizes yet giving space for the twisted pairs and power cores that form the internal geometry.
Device interfaces are fixed: the controller end carries the INS0760 connector and the encoder side is equipped with an AEH plug, eliminating field termination errors. Internally, the cable follows a 4×2×0.25 mm² plus 2×0.5 mm² layout, and each control core maintains a cross-section of 0.25 mm² to keep voltage drop low on long runs. It is halogen-free to reduce corrosive gas emission during fire, and its suitability for drag chain use is confirmed by the reinforced braid and filler system. The outer sleeve follows RAL 2003 (orange) for quick visual identification in machine enclosures.
Frequently Asked Questions about RKG0029:
Q: What is the maximum number of bending cycles the RKG0029 encoder cable supports?
A: The RKG0029 cable is designed to withstand up to 5,000,000 bending cycles, making it suitable for applications with frequent motion.
Q: What material is used for the outer jacket of the RKG0029 encoder cable?
A: This cable features a jacket made from PUR material, providing durability and resistance to abrasion.
Q: Is the Bosch Rexroth RKG0029 encoder cable suitable for use in drag chains?
A: Yes, the RKG0029 is designed for drag chain use, allowing it to be installed in dynamic applications.
Q: Does the Bosch Rexroth RKG0029 cable contain halogen in its construction materials?
A: The RKG0029 is halogen-free, helping to reduce the emission of toxic gases in case of fire.
Q: What is the outer diameter of the RKG0029 encoder cable from Bosch Rexroth Indramat?
A: The RKG0029 cable features an 8.8 mm outer diameter, which allows for easy installation in cable tracks and ducts.
