RKG0010 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
Current response time:
4 Minutes
8 Seconds
The Bosch Rexroth Indramat RKG0010 belongs to the RKG Encoder Cables series and features a cable diameter of 10.0 mm with a PUR matt jacket material. It supports a control wire operating voltage of 300 V AC and is designed for dynamic bending cycles up to 5 million. The cable includes an INS0761 plug on the controller side and INS0769 plug on the encoder side.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKG0010 is an encoder feedback cable manufactured by Bosch Rexroth Indramat within the RKG Encoder Cables series. It forms the physical link between a position transducer and a drive controller, carrying incremental or absolute signals as well as auxiliary supply conductors in industrial automation systems. By using a multi-core layout and matched connectors, the assembly ensures interference-resistant data transfer so that servo axes retain precise position information during continuous machine operation.
To withstand repetitive motion in cable chains, the assembly is rated for 5 million bending cycles. Its outer sheath measures 10.0 mm in diameter, providing enough wall thickness for abrasion resistance while remaining flexible. The internal layout follows a 3×0.25 + 3×(2×0.25)StC + 2×1.0 mm² composition, separating feedback, reference, and power conductors. Signal pairs made of 0.25 mm² copper exhibit a conductor resistance of 83.0 Ω/km, keeping voltage loss low on typical machine lengths. The control cores can carry up to 300 V AC for encoder supplies, and the PUR Matt jacket resists oil, coolant, and hydrolysis without halogens.
When installed in energy chains, the cable observes a minimum dynamic bending radius of 7.5 x D, allowing tight loops without exceeding copper strain. For stationary routing, the radius can be reduced to 5 x D. With these limits, a continuous horizontal travel of 50 m is supported before signal integrity becomes a concern. The larger 1.0 mm² pairs present a line resistance of 19.3 Ω/km, ensuring current delivery to remote sensors. An INS0761 plug is fitted on the controller side, while the encoder side terminates in an INS0769 plug, providing keyed connections that match Rexroth drives and feedback devices. The cable is halogen-free, and these features make RKG0010 suitable for high-cycle axes in packaging and material-handling lines.
Frequently Asked Questions about RKG0010:
Q: What is the cable diameter of the RKG0010 encoder cable from Bosch Rexroth Indramat?
A: The RKG0010 encoder cable features a 10.0 mm diameter, providing a substantial cross-section for industrial use.
Q: How many bending cycles can the RKG0010 encoder cable support?
A: This cable is specified to withstand up to 5 million bending cycles, ensuring suitability for highly dynamic applications.
Q: What is the maximum horizontal travel path of the RKG0010 encoder cable?
A: The maximum horizontal travel path allowed for the RKG0010 is 50 meters.
Q: Which connectors are used on both ends of the RKG0010 encoder cable?
A: The RKG0010 uses an INS0761 plug connector on the controller side and an INS0769 plug connector on the encoder side.
Q: Does the RKG0010 encoder cable have a halogen-free jacket material?
A: The RKG0010 encoder cable is manufactured with a halogen-free PUR jacket, making it suitable for environments where low emissions during fire are required.
