RKG0001 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
Current response time:
6 Minutes
43 Seconds
The Bosch Rexroth Indramat RKG0001 is part of the RKG Encoder Cables series and features a PUR matt jacket that is halogen-free and hydrolysis resistant. This cable offers total shielding, supports 5 million bending cycles for drag chain use, and has a bend radius of 5×D. It comes with a D-Sub 15-pin controller connector and an M23 17-pin motor connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKG0001 is an encoder feedback cable produced by Bosch Rexroth Indramat for the RKG Encoder Cables series and is intended to carry position signals between a motor-mounted encoder and the corresponding drive controller in automated machinery.
A compact outer diameter of 9.7 mm helps route the assembly through tight cable ducts, while a fixed installation bend radius of 5×D preserves conductor integrity when the cable is anchored inside enclosures. For dynamic motion, the design tolerates up to 5,000,000 bending cycles, allowing continuous travel inside energy-chain systems. The controller end terminates in a D-Sub 15-Pin plug that uses soldered pins, and the motor side employs a rugged M23 17-Pin socket with crimp contacts to match IndraDyn encoders. Internally, three twin-pair control cores rated at 0.25 mm² carry data, whereas a separate pair of 1.0 mm² supply conductors delivers sensor power.
A matt, abrasion-resistant jacket made from PUR (Matt) encloses the bundle and a Total Shield provides 360-degree EMC suppression against drive-switching noise. The material selection is halogen-free, hydrolysis resistant, and remains flexible in the presence of cutting fluids; and is resistant to Mineral Oils And Greases. Continuous drag-chain use is approved, and the construction supports installation in damp areas without jacket degradation. Power wiring capacity is stated as 2×1.0 mm², giving adequate headroom for 24 V encoder supplies even on long runs.
Wake Industrial offers same-day shipping on qualifying orders, backs each RKG0001 with a 1-year warranty, and keeps quotations valid for 30 days to streamline procurement.
Frequently Asked Questions about RKG0001:
Q: What is the maximum number of bending cycles supported by the Bosch Rexroth RKG0001 encoder cable?
A: This cable can handle up to 5,000,000 bending cycles, making it suitable for applications with frequent movement.
Q: What type of controller connector does the Bosch Rexroth RKG0001 cable use?
A: The RKG0001 features a D-Sub 15-pin connector for the controller side with solder contact pins.
Q: Is the Bosch Rexroth RKG0001 cable suitable for drag chain applications?
A: This cable is designed for use in drag chains, providing flexibility and durability in dynamic environments.
Q: What material is used for the outer jacket of the RKG0001 cable?
A: The outer jacket is made of matt PUR, offering a combination of durability and hydrolysis resistance.
Q: Is the Bosch Rexroth RKG0001 encoder cable completely halogen-free?
A: The Bosch Rexroth RKG0001 cable is halogen-free, making it safer for use in environments where reduced toxic emissions are important.
