RKB0011 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
51 Seconds
The Bosch Rexroth Indramat RKB0011 is a multi-Ethernet cable designed for drive-controller Ethernet links and belongs to the RKB Control Cables series. It features RJ-45 snap-in connectors on both ends, supports a data rate of 100 Mbit/s, and is compatible with SERCOS III, EtherCAT, PROFINET, and EtherNet/IP networks. The cable uses a PUR polyurethane jacket, offers overall EMC shielding, and is rated for 600 V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RKB0011 cable is produced by Bosch Rexroth Indramat within the RKB Control Cables series. It forms a ready-to-install Ethernet link between drive amplifiers and the central controller in automated machinery, eliminating the need for on-site crimping or pin assignment. Factory-terminated plugs help the assembly maintain consistent impedance while reducing setup time in multi-axis systems that rely on synchronized network communication.
As a multi-Ethernet line, the assembly supports a sustained data throughput of 100 Mbit/s, matching the electrical timing of 100BASE-TX (IEEE 802.3u). This bandwidth permits deterministic exchange of cyclic setpoints and feedback over SERCOS fieldbus, as well as standard TCP/IP traffic. The cable is intended for use on a drive-to-controller Ethernet link, and its conductor geometry meets the characteristic impedance requirements for high-speed differential pairs. Compatibility with SERCOS III / EtherCAT / PROFINET / EtherNet/IP allows the same part to serve mixed networks without changing hardware. For machine panels that carry motor power next to signal lines, the conductors are rated to 600 V, and the overall EMC shielding of foil and braid helps attenuate radiated noise so that encoder feedback remains stable.
Mechanical construction follows the predefined RBS0016-REB0400-RBS0016 assembly stack, meaning each end is furnished with factory-molded plugs that enclose the REB0400 bulk cable segment. The core cable itself is identified as REB0400, a fine-stranded design chosen for flexible routing inside moving-axis drag chains. A tough PUR (polyurethane) jacket resists cutting oils and repeated bending, helping the cordset meet typical servo-drive service life targets. Both ends terminate with RJ-45 connectors (RBS0016), and the snap-in latching hardware secures the mating interface to help prevent accidental release during vibration or cable movement.
Frequently Asked Questions about RKB0011:
Q: What type of connectors does the RKB0011 control cable have on each end?
A: The RKB0011 uses RJ-45 connectors (RBS0016) on both ends, making installation straightforward for Ethernet-based systems.
Q: What is the maximum supported data rate of the RKB0011 cable?
A: This cable supports a data rate of up to 100 Mbit/s, suitable for industrial Ethernet communication.
Q: Which industrial Ethernet protocols is the RKB0011 cable compatible with?
A: The RKB0011 is compatible with SERCOS III, EtherCAT, PROFINET, and EtherNet/IP networks.
Q: What material is used for the outer jacket of the RKB0011 cable?
A: The RKB0011 features a PUR (Polyurethane) jacket for enhanced durability in demanding industrial environments.
Q: Does the RKB0011 cable include shielding against electromagnetic interference?
A: This model provides overall electromagnetic shielding to help reduce interference in sensitive network applications.
