4.95 based on 204 reviews

🙶 We have never had a problem in the almost 20 years we have dealt with Wake. We would recommend them to any... 🙷

RH2-025DBB Bosch Rexroth Indramat

In-Stock, Ships 3-5 Days

Current response time:
6 Minutes 8 Seconds

Preparing your secure checkout page...

The Bosch Rexroth Indramat RH2-025DBB is a hybrid cable from the RH2 Encoder Cables series. It features a single-cable connection scheme, basic cable design, and a cross section of 1.5 mm² with 16 AWG power conductors. The cable supports up to 5,000,000 bending cycles and has a current capacity of 15.6 A.

Warranty
Wake Industrial Warranty

Quote Request Form:

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The RH2-025DBB encoder cable is produced by Bosch Rexroth Indramat for the RH2 Encoder Cables series and is supplied as a hybrid lead that carries motor power and feedback signals in one sheath. In automated machinery, this single-route wiring reduces the amount of panel space required for cable routing. It also simplifies installation by replacing separate power and feedback cables with one combined assembly. The shared cable path helps keep the feedback connection aligned with the corresponding motor power connection throughout moving machine sections.

The cable is rated for 5,000,000 flexing cycles, making it suitable for continuously moving axes such as linear robots and drag-chain carriers. Its classification as a hybrid cable means that the power conductors, signal pairs, and shielding are combined within one jacket, eliminating the need for parallel cable runs. A single-cable connection interface mates directly with compatible IndraDrive motors, so a separate encoder plug is not required. The copper conductors can carry up to 15.6 A, supporting medium-frame servo motors while limiting excessive conductor heating. During dynamic motion, the jacket can bend to a minimum radius of 7.5 × D. Maintaining this bend radius protects the conductor arrangement and preserves signal integrity for high-speed encoder pulses.

The cable uses a basic design with a second-generation construction that incorporates updated insulation and jacket compounds for improved chemical resistance. Power delivery uses a conductor cross-section of 1.5 mm² along with a separate 16 AWG conductor set for higher surge tolerance. The internal arrangement, written as “[4 × L + (2 × 0.5 mm²)C + (4 × AWG 24)]StC,” identifies the combination of power, control, and feedback conductors within the sheath. When the cable remains stationary after routing, it requires a minimum bend radius of 5 × D to prevent stress on the internal conductors. The RH2 family belongs to the Rexroth Cables product group and uses standardized connector interfaces and color coding for integration into multi-axis drive systems.

Bending Cycles
5,000,000
Cable Design
Basic
Cable Type
Hybrid Cables
Cabling
[4x L + (2x 0.5 mm²)C + (4x AWG 24)]StC
Connection Scheme
Single-Cable Connection
Cross Section
1.5 mm²
Current Capacity
15.6 A
Dynamic Bend Radius
7.5xD
Generation
2nd Generation
Power Conductor Awg
16 AWG
Product Group
Rexroth Cables
Static Bend Radius
5xD

Frequently Asked Questions about RH2-025DBB:

Q: What is the bending cycles rating for the RH2-025DBB cable from Bosch Rexroth Indramat?

A: The RH2-025DBB supports up to 5,000,000 bending cycles for long service life in dynamic applications.

Q: What connection scheme does the Bosch Rexroth RH2-025DBB encoder cable use?

A: This model features a single-cable connection scheme, combining power and signal transmission in one cable.

Q: What is the maximum current capacity of the Bosch Rexroth RH2-025DBB encoder cable?

A: The RH2-025DBB has a current capacity of 15.6 A, supporting higher current requirements for connected devices.

Q: What is the dynamic bend radius rating for the Bosch Rexroth RH2-025DBB encoder cable?

A: A dynamic bend radius of 7.5xD is specified for this cable, allowing for tighter bends during movement.

Q: What is the AWG size of the power conductor in the RH2-025DBB encoder cable?

A: The power conductor in the RH2-025DBB cable is sized at 16 AWG.


Internal Product Review

  • ‘‘The RH2-025DBB hybrid cable from the RH2 Encoder Cables series by Bosch Rexroth Indramat features a basic cable design with a single-cable connection scheme, streamlining installation. It delivers a current capacity of 15.6 A and supports up to 5,000,000 bending cycles for reliable operation in dynamic environments. This second-generation cable is a strong choice for demanding automation tasks.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo