RG2-500ABB Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RG2-500ABB is an encoder cable from the RG2 Encoder Cables series. It is a 2nd generation analog cable with a basic design, M17 encoder connector, and a cross-section of 0.50 mm². The cable supports up to 5 million bending cycles, rated voltage of 300 V for both power and signal wires, and operates in temperatures from -20 to +80 °C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RG2-500ABB is an encoder feedback cable produced by Bosch Rexroth Indramat and supplied within the RG2 Encoder Cables series. It is intended to link motor-mounted encoders to drive controllers, transferring position and speed data for closed-loop motion control in industrial automation cells.
This cable is specified for continuous operation between -20 to +80 °C, so it can remain in service beside warm servo motors or inside chilled enclosures. Flexing durability is confirmed by a life of 5 Million bending cycles, while the copper conductors have a cross-section of 0.50 mm² to balance current capacity and outside diameter. During motion, the sheath may be bent to a dynamic radius of 7.5xD, and both power and signal pairs are rated at 300 V, allowing installation in mixed-voltage cable tracks. The design follows the Encoder Cable type definition and carries analog cabling for incremental or sine-cosine transducers.
For storage or spares holding, the assembly withstands ambient limits of -40 to +80 °C. It belongs to the 2nd Generation of RG2 wiring, reflecting insulation materials selected for higher abrasion resistance and lower capacitance. The motor-side plug is the compact M17 Encoder connector that mates directly with Rexroth encoder flanges, and its core insulation remains intact when the cable is routed to a static radius of 4xD inside a fixed cabinet. The build is listed as Basic cable design, meaning a single PVC jacket without additional armour, and the product is identified by Bosch Rexroth Indramat as a Rexroth Cable for straightforward replacement within existing harness schemes.
Frequently Asked Questions about RG2-500ABB:
Q: What is the operating temperature range for the RG2-500ABB encoder cable?
A: The RG2-500ABB encoder cable supports an operational ambient temperature range of -20 to +80 °C.
Q: What type of connector is equipped on the motor side of the RG2-500ABB cable?
A: The RG2-500ABB features an M17 Encoder connector on the motor side.
Q: How many bending cycles can the RG2-500ABB cable withstand during dynamic use?
A: This cable is rated for up to 5 million bending cycles, making it suitable for applications involving frequent motion.
Q: What is the conductor cross-section size in the RG2-500ABB encoder cable?
A: The RG2-500ABB encoder cable is built with a 0.50 mm² cross-section for each conductor.
Q: What is the cable type and generation of the RG2-500ABB from Bosch Rexroth Indramat?
A: The RG2-500ABB is a 2nd Generation basic analog encoder cable from Bosch Rexroth Indramat.
