Product Description

The RD52.1-8N-045-L-V1-FW drive control offered by Bosch Rexroth may cause a risk of injury because of inappropriate handling such as mechanical shock, cutting, shearing and/or crushing. The product should be started only if the machine comprising it is in agreement with the national safety specifications and regulations pertaining to the application. The device must not be deployed for medical, nuclear or radioactive applications. It comes with guards and covers that must be installed before it is turned ON to avoid contact with live parts. The unit can have high voltage levels on its housing. The control shows signs of dangerous movements due to defective components, software errors, wrong or incorrect cable connections and the like.

The drive control should be brought to standstill mode before entering or accessing the danger zone. Its power connection must be isolated using a start-inhibit system to avoid unplanned startup. The vertical axes of the product have to always be secured against slipping or falling after the motor is switched OFF by securing them mechanically or adding a clamping or an external brake mechanism. The resistors and heatsinks of the device become very hot during the operation period. The unit is not equipped with a built-in chopper. It has 1 design code.

The control has a type label associated with it. The product is associated with a 24V standby power supply. This device must neither be installed nor operated in improper working condition or damaged state. The unit is often used in machine tools, handling and assembly systems as well as hoist, conveyor, chemical and process technologies. It is not supposed to be made to function when there is extreme temperature variation or very high temperature. The product is fitted with a power section that is designed for cooling at the rear. The relative humidity of this device should not exceed 90%. The RD52.1-8N-045-L-V1-FW control is transported through reputed freight carriers with a warranty period of one year.