Product Description

Bosch Rexroth group is a renowned industrial equipment company. It produces drive converters, assembling equipment, motors, drive controllers, and drive inverters. In addition, it offers linear motion devices to aid businesses in remaining updated on the latest and most lucrative market developments.

The RD52.1-4B-037-L-V1-FW model has a 24 V standby power supply and flux vector control technology. In the most complex and dynamic driving activities, flux vector control is used. The RD52.1 drive controller may be used with or without an encoder. This drive converter can power induction and synchronous three-phase motors. The internal temperature of the drive converter is regulated by a forced cooling system that circulates air from the outside to the inside through a blower unit. This model's firmware is not included and must be bought separately; nonetheless, it has a brake chopper. The RD52.1 drive converter delivers 37 kW of power and draws 68 A of rated current at 480 V. The drive converter must be used with the components suggested by the manufacturer. If the humidity is higher than 90 percent and the temperature is not between 0 and 40 degrees Celsius, the model should not be utilized.

The model RD52.1-4B-037-L-V1-FW dimensions are 500 mm in length, 270 mm in breadth, and 320 mm in depth, and it weighs 33 kilograms. The controller is powered by a three-phase power supply module that runs at 380-480 volts alternating current (AC) with a 10% tolerance. The model creates 50 horsepower while using 88 amps of peak current per minute, 116 amps per second, and 136 amps per half-second. This product (RD52.1-4B-037-L-V1-FW) is available from Wake Industrial; order it now to get a replacement warranty and prompt shipment to your location.