Product Description:

The QSK075D-0200-NN-M5-UG1-NNNN is a synchronous servo motor developed by Bosch Rexroth Indramat for the QSK Servo Motors series. As a rotating actuator, it converts controlled electrical power into precise mechanical motion, allowing factory controllers to position tooling, indexing tables, or pick-and-place heads with tight repeatability. Its embedded feedback device supplies absolute rotor information, while the stator winding labeled 0200 is suited for mid-torque duty cycles common in packaging, printing, and small material-handling equipment.

The connection assembly uses a 240° rotatable plug so cable exit can be aligned toward the cabinet sidewall or ceiling without stressing conductors. Thermal losses are carried off by natural convection, eliminating auxiliary fans. Inside the feedback module, the disk produces 128 signal periods per mechanical turn; this resolution reaches the drive through the Hiperface protocol, which carries power and data on one shielded pair. An optical sensing path helps the code tracks resist magnetic interference and maintain linearity over the motor’s operating temperature range.

Long-range position tracking is possible because the encoder stores revolution counts with its multi-turn absolute architecture, supporting resumed operation after power loss without a reference move. Load holding on vertical axes is managed by a brake capable of 23 Nm, activated automatically when supply voltage is removed. Output torque is transmitted through a plain shaft with a shaft sealing ring, which helps block oil ingress while fitting standard clamp or keyed hubs. The housing corresponds to size 075 with frame length D, and this footprint lets machine builders interchange motors across the series without altering flange patterns, bearing sets, or shaft center height.