PSI63C0.725-W2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
59 Seconds
The Bosch Rexroth Indramat PSI63C0.725-W2 is a medium frequency inverter from the PSI Frequency Inverters series and weighs approximately 25 kilograms. It features water cooling, an IP20 protection rating, and operates with a mains voltage of 480 to 690 VAC at either 50 or 60 Hz. The integrated power supply unit provides a maximum output current of 2 Amps at 24 VDC.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PSI63C0.725-W2 is a medium-frequency inverter produced by Bosch Rexroth Indramat for the PSI Frequency Inverters series. In automated plants, this unit converts high-voltage three-phase mains power into a controllable medium-frequency output that drives induction coils, heat-treating equipment, or other loads that require adjustable kilohertz power. The inverter integrates an auxiliary supply for sensors and contactors, allowing low-level control circuits to receive power from the same enclosure without requiring an external supply. This arrangement reduces the number of separate power components needed within the control cabinet.
This model removes switching heat through a water-cooled plate, limiting thermal stress with a maximum heat dissipation of 420 W. It accepts line voltages between 480–690 VAC and synchronizes automatically with 50/60 Hz grids, providing flexibility across different industrial power systems. An internal auxiliary converter delivers a regulated 24 VDC rail that keeps the control electronics active when the power stage is disabled. The climatic rating of 3K3 under EN 60721-3-3 indicates suitability for clean, temperature-controlled machine halls. EtherNet timing support enables time-critical commands and diagnostic data to travel over standard industrial networks without requiring a separate communication path.
The enclosure has an IP20 degree of protection, so it must be installed inside a cabinet while providing protection against accidental finger contact with internal components. The auxiliary supply can provide up to 2 A, which is suitable for small relays, sensors, and proximity switches connected to the control circuit. Reliable operation is supported at ambient temperatures from +10 to +55 °C, while noncondensing storage is permitted from -25 °C to +70 °C. At approximately 25 kg, the inverter requires a mounting surface and fasteners capable of supporting its installed mass. Adequate cabinet clearance must also be provided for electrical connections, coolant lines, and access to the inverter’s control interfaces.
Frequently Asked Questions about PSI63C0.725-W2:
Q: What cooling method is used by the PSI63C0.725-W2 frequency inverter?
A: The PSI63C0.725-W2 frequency inverter is water-cooled, which helps manage heat during operation efficiently.
Q: What is the mains voltage range for the PSI63C0.725-W2?
A: This model operates with a mains voltage range of 480 to 690 VAC, making it suitable for industrial power grids.
Q: What output voltage does the integrated power supply unit deliver on the PSI63C0.725-W2?
A: The integrated power supply unit provides an output voltage of 24 VDC, which is suitable for standard industrial control systems.
Q: What is the degree of protection for the PSI63C0.725-W2 frequency inverter?
A: The degree of protection for this inverter is rated at IP 20, offering basic protection against solid objects.
Q: What is the operational temperature range for the PSI63C0.725-W2?
A: This unit is specified for operation within a temperature range of +10 to +55 ºC, which covers most industrial environments.
