PSI63C0.715-L2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat PSI63C0.715-L2 is a medium frequency inverter in the PSI Frequency Inverters series. It operates with a mains voltage of 480 to 690 VAC and features air cooling with a maximum cooling loss of 360 W. This inverter provides an integrated power supply unit output voltage of 24 VDC at up to 2 A, has IP20 protection, and weighs approximately 21 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PSI63C0.715-L2 is a medium-frequency inverter produced by Bosch Rexroth Indramat for the PSI Frequency Inverters series. In automated machining cells, it converts high-voltage three-phase mains power into a regulated medium frequency for induction heaters, shrink-fit stations, and similar power loads. This conversion allows connected equipment to receive controlled power during timed heating processes. The unit incorporates an internal 24 V control supply, so ancillary sensors and relays can be powered directly from the inverter chassis, simplifying panel wiring and reducing the need for a separate control supply.
The power stage accepts a nominal input of 480–690 VAC, enabling connection to common high-voltage plant grids without an external step-up transformer. Line synchronization is maintained at 50 or 60 Hz, allowing the same model to operate with either supported mains frequency. The control and power electronics are enclosed in an IP20 housing, which protects against accidental contact with live components but requires installation inside a closed cabinet. Heat is removed through an air-cooled channel, while the integrated control supply provides 24 VDC and delivers up to 2 A for field I/O devices. The Ethernet-based timer coordinates start, dwell, and stop periods with upstream controllers. Forced cabinet ventilation must carry away the thermal energy generated during operation and maintain adequate airflow around the inverter.
Thermal losses can reach a maximum of 360 W, so cabinet airflow must keep the internal temperature within the permitted operating range of +10 to +55 °C. The inverter weighs 21 kg, requiring a mounting surface and fasteners that can support its mass under normal machine vibration. Its climatic class is 3K3 according to EN 60721-3-3, making it suitable for production areas without conductive dust or corrosive vapors. During storage or transportation, the electronics tolerate temperatures from -25 to +70 °C. These storage limits allow the unpowered unit to remain in typical warehouse and shipping conditions without requiring active temperature control.
